- First Name
- Robert
- Joined
- Nov 10, 2021
- Threads
- 14
- Messages
- 160
- Reaction score
- 115
- Location
- Canada, Ontario
- Vehicle(s)
- 2022 Maverick
- Engine
- 2.0L EcoBoost
Sponsored
Last edited:
Sponsored
- First Name
- John
- Joined
- Oct 24, 2021
- Threads
- 11
- Messages
- 951
- Reaction score
- 985
- Location
- New York,LI
- Vehicle(s)
- 22 FX4, 25 LARIAT HYBRID, 26 LOBO 702.
- Engine
- 2.0L EcoBoost
Anybody try mounting in the rear, I have my dash cam plugged in on the dash. tried using lighter plug but stays hot all the time.
- First Name
- Bob
- Joined
- Dec 25, 2021
- Threads
- 139
- Messages
- 2,391
- Reaction score
- 1,579
- Location
- New Jersey
- Vehicle(s)
- 2022 Maverick, 2003 MR2, 2019 Forrester, 1969 Z/28
- Engine
- 2.0L EcoBoost
Looks to me they changed where the usb ports are. Mine are on the right and was able to velcro the ma1 right under it. Unless it's a different on the trims.I mounted my Motorola MA1 this way using velcro.
Sponsored
OP
OP
- First Name
- Chad
- Joined
- Dec 29, 2021
- Threads
- 9
- Messages
- 41
- Reaction score
- 107
- Location
- Greenwood, Arkansas
- Vehicle(s)
- 2011 Tundra
- Engine
- 2.0L EcoBoost
- Thread starter
- #37
Thanks everyone, I went with the Motorola as I was able to pick it up yesterday at Best Buy instead of ordering it, instant gratification you know. I printed the housing and it currently looks factory-ish but is good enough for me and performs perfectly.
- First Name
- Bob
- Joined
- Dec 25, 2021
- Threads
- 139
- Messages
- 2,391
- Reaction score
- 1,579
- Location
- New Jersey
- Vehicle(s)
- 2022 Maverick, 2003 MR2, 2019 Forrester, 1969 Z/28
- Engine
- 2.0L EcoBoost
Thanks makes sense. But the ma1 tucks under tgere perfectly.
- Banned
- #39
I have one very similar and it has been rock solid.I'm satisfied with mine. https://www.amazon.com/dp/B0C2YR4WXM?ref=ppx_yo2ov_dt_b_product_details&th=1
Here's a photo of my latest iteration to hold the adapter underneath (since the Velcro adhesive melted in the heat). It's a 1/16" horseshoe spacer shim for tiling with a hole drilled in it, using the bolt to hold it in placeHere are some photos of what it looks like. Pretty clean from the driver's perspective but need to figure out a better way to mount it underneath. I'm wondering if one of the bolts underneath can be used to hold a retaining clip or something.
it ain't pretty but it's nice and snug and you can't see it unless you get down in there
Does anyone know the size/length of the fastener Chugalug used to mount that improvised cable holder? I'm thinking that, with a longer version, and a bushing, that gets the head(s) out past the recess they are in, and then there are more options for mounting cable holders.
Sponsored
