So What Are/Were Your Top 3 Planned or Performed Mods/Additions

[Deleted member 6544]

I won't even get into the cosmetic adds ons but the real ones...
I've installed Buschur's catch can and cold air intake.
Ordered Scale Suspension coilerovers, Steeda sway bar, (received), and Magnaflow exhaust. And I added the eco and sport drive modes to the FX4 package.
I think that's it, for now!
Oh and I installed a switch in the storage cubby on the left. Adding bed lighting to the left side. I bought a second storage bin for that side.

Sponsored

 

[OleFordGuy]

When (If?) I get my Mav this is my list starting with what I already have then the top 3


Already have -

Replace tires with Nokian APT​

Husky Weatherbeater all weather mats​

Black vinyl tail gate letter inserts​

Gumby and Pokey for dash cubby​

K&N drop in air filter​

Center console tray/organizer (ordered)​

Truxedo Lo Pro soft roll up
Drop-in Bedliner
ForScan mods -

Change out XLT turn signal with turn signal and lane keeping switch and add lane keeping and traffic sign recognition​

Add non-FX4 drive modes​

Tailgate assist
LED swap for cargo and reverse lights Maybe for front turn and rear brake/turn as well.
Tint front windows to match rear windows
Graphene treatment for paint/plastic/windows
Dash cam
Add engine cover (from Escape)
Add bed tie-down anchors (don't see a need for adjustable ones in such a short bed)
Add bed cubby to driver side
Add 12v and USB panel to bed cubby
Ecoboost tailgate emblem
Tufskins accent trim (bring some cactus gray color inside)
Auto-dimming rear mirror
Some sort of sunshade

Enough to start...

Wow that’s a good list, I’d go broke

 

[FirstFord]

Katzkin custom leather
BAK Revolver X4S hard rolling cover
Front window tint

 

[OleFordGuy]

Katzkin custom leather
BAK Revolver X4S hard rolling cover
Front window tint

Entire front window or a section at top? what percent? Thanks in advance.

 

[Hdang1980]

The door protector on the side not very effective due to were you install it down low. Suv and truck doors miss it completely. Doesn't protect your doors edge either. The tailgate plastic protects from people walking by with bags also helps protect if you drop it on a trailer hitch.. it's expensive and the only part I didn't do was the fender flares

That was my concern about those door moldings - not doing the job they were designed to do.

I know the general consensus about nerf bars/running boards amongst maverick owners ranges from "why"?, "yuck", "ewww" and "unnecessary", but I'm really considering them as a means of protection for the doors. The sheet metal is quite thin and easily dented with minimal force. Even a 3 inch wide nerf bar will do.

 

[Scupking]

Picking up my hybrid Mav Saturday!

1. Dealer is installing a spray in bed liner
2. Smartliner floor liners ordered
3. Gator SFX tri fold soft cover ordered
4. Armrest storage cubby with orange accent ordered
5. Jump starter to keep under the seat
6. Ford bed mat
7. Second bed cubby on drivers side
8. Wood bed divider
9. 235/65/17 Toyo open country A/T III

I think that is a good start!!

 

[Hdang1980]

Entire front window or a section at top? what percent? Thanks in advance.

You can ceramic tint the entire windshield clear and it will block the 90%+ of the UV and infrared rays. I plan on getting it myself. I think it's money well spent.

 

[marpolsdofer]

Well not sure what one is top 3 but here is my list.
Soft roll up cover. There was a trifold that was quick, easy to remove, and not expensive. So maybe that.
Mud Guards
Floor Mats.
Cheap Bed Mat.
Adding ACC and stuff we don't get unless we pay top of the line.
Upgrade the audio.

 

[OleFordGuy]

You can ceramic tint the entire windshield clear and it will block the 90%+ of the UV and infrared rays. I plan on getting it myself. I think it's money well spent.

Then thats an awesome "no brainer" to do. I wasn't aware of that. Thank You

 

[OleFordGuy]

Well not sure what one is top 3 but here is my list.
Soft roll up cover. There was a trifold that was quick, easy to remove, and not expensive. So maybe that.
Mud Guards
Floor Mats.
Cheap Bed Mat.
Adding ACC and stuff we don't get unless we pay top of the line.
Upgrade the audio.

Nice! That sorta matches up to alot of my thoughts, except the ACC and audio

 

[Haha48]

That was my concern about those door moldings - not doing the job they were designed to do.

I know the general consensus about nerf bars/running boards amongst maverick owners ranges from "why"?, "yuck", "ewww" and "unnecessary", but I'm really considering them as a means of protection for the doors. The sheet metal is quite thin and easily dented with minimal force. Even a 3 inch wide nerf bar will do.

I actually don't mind the look if you get them all but 499 and 299 canadian ect for the parts not worth the cash high cost. The side molding comes with glue to put it on not just tape the back is just taped on. Once they on they're on. Is it worth it not really since it's expensive . The bed liner is better value. I also got the wind deflector you can't see through them and they look ok really cheaply made was 200 for that

 

[JBnorthTX]

I did a spray-in bedliner, tonneau cover, and hood protector right after delivery. All weather floor mats just arrived and I'm looking at tailgate lettering. Probably will get the tailgate assist soon, too.

 

[Hdang1980]

I actually don't mind the look if you get them all but 499 and 299 canadian ect for the parts not worth the cash high cost. The side molding comes with glue to put it on not just tape the back is just taped on. Once they on they're on. Is it worth it not really since it's expensive . The bed liner is better value. I also got the wind deflector you can't see through them and they look ok really cheaply made was 200 for that

Not sure if you meant the cost of the nerf bar not being worth it but to me it would be. I just recently had a quarter sized dent fixed for $280. If that nerf bar saves me from 1 more dent, it will have been worth it.

 

[Haha48]

Not sure if you meant the cost of the nerf bar not being worth it but to me it would be. I just recently had a quarter sized dent fixed for $280. If that nerf bar saves me from 1 more dent, it will have been worth it.

The side plastic wont do much it sticks out but the majority of doors miss it. Low cars that's it. Truck or suv door the edge opens higher up and will make contact. It only covers part ot the door not to the edge so it won't protect you from hitting something like a pillar in a underground parking lot. The way it lines up the fact you glue it on so you screw up installing it it's a paint job to fix. It's seems practical seems like a good idea in reality it's basicly just for looks. I figured it would work well for car doors in reality not so much

 

[mcc63303]

Hybrid XL: Functional was my path. Added cruise control switches and programmed. Next was replacing manual tail gate lock with a power lock. FOMOCO Mud flaps, Maverick rubber floor mats and bed mat. Storage cabbies on both sides in bed. Tonneau cover. Jumper box under back seat.

Sponsored