- First Name
- Mark
- Joined
- Jul 5, 2022
- Threads
- 9
- Messages
- 189
- Reaction score
- 239
- Location
- California, CA
- Vehicle(s)
- '09 F-150, '22 Maverick
- Engine
- 2.5L Hybrid
As a side note, I'm working on a new plug concept that uses an xt60 connector and mounts to one of the rubber routing plugs (instead of the Flexbed knockout) specifically for people with coolers. Ideally that takes up less space than the cigarette sockets and allows you to use that flex bed knockout for something else like a switch for bed lights.I also have the @Maverick_Innovation_Designs installed on the back of my truck...absolutely wonderful construction and very happy with them.
They do now have a new design out that allows higher draw for higher power demands...if I didn't already have mine, I would definitely get the new ones!
They allow a higher draw, is what I am thinking and that might work in your favour.
However, you can plug in a a 12 volt cooler (one of my plugs at the back is a 12 volt power port/lighter socket for this exact purpose) into yours if that is what you have, as that is a good amount of draw from the power port!
Maybe it will work for you. Just a thought that works with what you suggested.
Have a good one,
Andy
I realize the number of people have the cigarette socket mostly for something like coolers. But that's also not something that they use all the time.
Sponsored