DIY HOW TO: Install adaptive cruise control in Maverick Hybrid XLT with Luxury package

[BlueSpec1]

I had the Park Aid error. Disabled "Park Aid Fault Warning Front & Rear" in IPC.
#648 fcoplo https://www.mavericktruckclub.com/f...rid-xlt-with-luxury-package.14586/post-823762

The settings I ended up with:

Sponsored

 

[Marcabus1234]

So I figured it out. I went into easy mode in the IPC and was able to disable the park aid. Super easy fix thanks again everyone.

 

[Marcabus1234]

Here are the settings I ended up with that worked. After you edit, go to the IPC in easy mode and disable all the Park Aid settings (I didn't get a picture of this part, but it's super simple).

2024 Tremor EcoBoost Advanced 4x4

 

[John Mike]

I'm just in the process of starting this mod on my 2024 Hybrid Lux. I wanted to take it in small bytes figuring I would just start with the button replacement in my steering wheel first. I got that installed but nothing in that button cluster works at all now. The Cruise control, nor the stereo volume/mute. Should these still work even without doing any programming for it yet? I've even gone back in removing my airbag again and unclipped and reclipped the plug to that button cluster and still nothing from it. I'm just starting to look at the Forscan changes needed in the original posting and trying to match them up to the spreadsheet to see if anything looks like they are specific to the switch functionality that might help (I thought some of the programming was primarily just for the new ACC functionality)

I appreciate any information anyone can provide me, hoping I don't have a bad switch.

 

[Marcabus1234]

I'm just in the process of starting this mod on my 2024 Hybrid Lux. I wanted to take it in small bytes figuring I would just start with the button replacement in my steering wheel first. I got that installed but nothing in that button cluster works at all now. The Cruise control, nor the stereo volume/mute. Should these still work even without doing any programming for it yet? I've even gone back in removing my airbag again and unclipped and reclipped the plug to that button cluster and still nothing from it. I'm just starting to look at the Forscan changes needed in the original posting and trying to match them up to the spreadsheet to see if anything looks like they are specific to the switch functionality that might help (I thought some of the programming was primarily just for the new ACC functionality)

I appreciate any information anyone can provide me, hoping I don't have a bad switch.

The switch is likely fine you have to edit one of the values in Forscan to get the switch to work.

SCCM
Block # 724-02-01

Change the first four digits to 1290 and leave the rest alone.

This should get your switch working.

 

[BlueSpec1]

For the steering wheel LH switch I changed SCCM 724-02-01

from

to:

Ref: Maverick2022XL #42 https://www.mavericktruckclub.com/f...ruise-control-xl-models-only.8959/post-186211

 

[John Mike]

The switch is likely fine you have to edit one of the values in Forscan to get the switch to work.

SCCM
Block # 724-02-01

Change the first four digits to 1290 and leave the rest alone.

This should get your switch working.

For the steering wheel LH switch I changed SCCM 724-02-01
...

Thank you both, that was it. I'm still a newbie with Forscan so it took me a little while to figure out where/how to change it (I always thought we were only supposed to change things in the 'non' AS BUILT items, but couldn't see how to do it there) but with BlueSpec1's screen shot I saw it was on the AS BUILT area and I was able to change it there and it looked like everything worked afterwards, at least my volume controls worked again and it showed my cruise control indicator came on when I pressed that button. So Thank You Thank You to you both again.

At least now I'll feel a little more confident moving on to the Radar module install within the next few days. But, I definitely need to learn more and hopefully a better understanding of Forscan.

 

[801Maverick801]

For anyone doing this Mod, please read through this whole thread. It takes time but it will answer so many questions I see here posted again and again.

 

[John Mike]

Just curious, I ordered the terminal pin connectors to go into the IPMA(PN LU2Z-14474-AA). The image for these showed 5 in the group. But when I got mine, I only got a single connector (my box actually had a packing package shipped to the dealer I ordered from, that said "1 package contains 5 pieces", but that package was cut open and a single connector was put in a zip lock bag). Did anyone else ordering that part actually get all 5? I ended up having to order it again and I'm waiting to see if it comes as a full set this time or just one again. If I get a full set this time, I'm going to try to call the dealer and complain that I didn't get the full set the first time and now I had to pay another $4.59 with a $8.45 in shipping just for this one item.

Just waiting on that pin to come in so I can finish with my build, everything else is installed.

 

[Marcabus1234]

The exact same thing happened to me. I ordered mine from eBay and the add even showed 5. I contacted the seller and they sent me the correct 5 pack. Most likely someone who was doing the shipping or pulling the parts didn't realize they are sold as a package and they just pulled one out.

 

[inline_five]

The exact same thing happened to me. I ordered mine from eBay and the add even showed 5. I contacted the seller and they sent me the correct 5 pack. Most likely someone who was doing the shipping or pulling the parts didn't realize they are sold as a package and they just pulled one out.

Dealers sell them as singles, guessing the ebay seller gave it to you to avoid a negative remark? Yeah the picture is crazy deceiving.

 

[JCMavGuy]

Anybody with a 25 and any kind of plan lurking around here?

 

[John Mike]

Has anyone completed the ACC on a 2024 XLT Hybrid Lux model yet? If so, can I get your values for the ABS, IPC, IPMA, PSCM, SCCM and BdyCM?

I've got mine all installed and having problems with getting it setup. I'm still getting 4 DTC codes that will not clear (PCM U0422, C-CM B1433, ABS U2101, IPMA U2300) I was also getting a IPMA U2101, but that one clears, but I think it returns the next time I recheck it at a later time.

I wasn't getting the C-CM "Calibrate Cruise Control Sensors" option, but I have downloaded and installed the .60 version of FORScan and that option is there now but haven't ran it yet so not sure if that will resolve my issues.

Following Itmoto's posting on Pg 17 (and looking for any other changes since then), I did change the BdyCM 726-04-05 value xxxx xxxx 90 from 88 and that cleared up a "Front Camera Fault Service Required" error message I was seeing.
I did try a different posting about leaving BdyCM 726-04-06 6025 instead of the 9025 but that gave me a "Pre-Collision Assist not Available" error, so I set it back to 9025.

I have not yet gone through all the other research that Itmoto did with his discovery yet.

So, right now when I press my Cruise Control button I'm getting an error message

So I have no cruise control currently.

Oh, and final thing, since I hooked up my CCM I'm seeing this emblem circled in red on my dash which is in orange. I don't know if that will go away once all the issues get resolved.

The CCM I got was PN: NZ6Z-9E731-A
Which I purchased from the Ford OEM Parts site.

I appreciate any help.

 

[John Mike]

I've got mine all installed and having problems with getting it setup. I'm still getting 4 DTC codes that will not clear (PCM U0422, C-CM B1433, ABS U2101, IPMA U2300) I was also getting a IPMA U2101, but that one clears, but I think it returns the next time I recheck it at a later time.

I ran the C-CM Module Reset and then the Calibrate Cruise Control Sensors and went out for the required drive. It reported that everything completed successfully.

That cleared up the C-CM DTC fault and also the little orange warning icon on my dash.

But when I press the Cruise control button I'm still getting the "Adaptive Cruise Not Available" popup warning message so still no cruise control yet.

Any ideas or help?

 

[inline_five]

I ran the C-CM Module Reset and then the Calibrate Cruise Control Sensors and went out for the required drive. It reported that everything completed successfully.

That cleared up the C-CM DTC fault and also the little orange warning icon on my dash.

But when I press the Cruise control button I'm still getting the "Adaptive Cruise Not Available" popup warning message so still no cruise control yet.

Any ideas or help?

I would suggest resetting back to base as built from your saved files, clearing DTCs and confirming everything is good.

Then go through the Forscan changes one by one and understanding what you are changing, and confirm no DTCs for each item changed. Yes this will take a while.

Don't just randomly put in what others have added as many things are option selectable in the menus and have no effect on activation of the ACC/lane centering.

Sponsored