DIY Forscan enabled Cruise control XL models only

[Twixel Jackson]

My SCCM modules are not showing up in Forscan. Has anyone had this issue? Any ideas how to fix it? Thanks

Sponsored

 

[Darnon]

My SCCM modules are not showing up in Forscan. Has anyone had this issue? Any ideas how to fix it? Thanks

Have you tried deleting the vehicle profile and letting it rescan for modules?

 

[Twixel Jackson]

I have not tried that....just tried it, no change.

 

[Twixel Jackson]

 

[mcc63303]

My SCCM modules are not showing up in Forscan. Has anyone had this issue? Any ideas how to fix it? Thanks

Did you purchase a license or using the free trial?

 

[Twixel Jackson]

Trying to use the free trial. Should I purchase a license?

 

[Telemachus]

Trying to use the free trial. Should I purchase a license?

Any change I have ever needed to do I have been able to do with the 90-day (free) license.

 

[Twixel Jackson]

Update: I was able to figure out why the SCCM module was not showing up. I was using the newest version of Forscan, 2.3.51 released on February 21st, 2023. After some research, I uninstalled this version and went back to 2.3.49 released on October 19th, 2022. It instantly populated the SCCM module so I was able to complete the cruise control installation on my 2022 XL.

 

[Bushpilot]

Update: I was able to figure out why the SCCM module was not showing up. I was using the newest version of Forscan, 2.3.51 released on February 21st, 2023. After some research, I uninstalled this version and went back to 2.3.49 released on October 19th, 2022. It instantly populated the SCCM module so I was able to complete the cruise control installation on my 2022 XL.

Please advise the developers of Forscan, so they can fix it.

 

[Usdmmark]

Threads died out a little, but I’ll be swapping steering wheels and switches shortly on my barebones XL ecoboost.

after reading through a good portion of this thread is this all the info I need to update? Or is there anything I need to add?


SCCM - 724-02-01 1258 4820 3030

ABS - 760-03-02 0200 0000 0573

BCM - 726-04-05 CB28 8140 8872

thanks.

 

[Telemachus]

Threads died out a little, but I’ll be swapping steering wheels and switches shortly on my barebones XL ecoboost.

after reading through a good portion of this thread is this all the info I need to update? Or is there anything I need to add?


SCCM - 724-02-01 1258 4820 3030

ABS - 760-03-02 0200 0000 0573

BCM - 726-04-05 CB28 8140 8872

thanks.

Everything you need to know is in post number 5

 

[RONR11]

Finally to program the Maverick XL using forscan.

The version used is 2.3.45 note only use this version for the 2.0L ecoboost engines. 2.5L hybrids use the software listed below.

edit
For hybrid vehicles the ABS module will not write at all. Forscan has since released a test version of the software than can write the ABS module for hybrid engines. I've had 1 confirmation it does so far but more should be forthcoming in this and the cruise control thread.
https://forscan.org/download/FORScanSetup2.3.46.test20220126.exe


Program codes

SCCM - 724-02-01 1258 6820 3050
For the correct switches after replacing the switches or putting a different wheel with the correct switches
This code is for a Maverick that also has Copilot 360 installed it will work on non Copilot 360 installations but if you experience any issues try this code instead
SCCM - 724-02-01 1258 4820 3030

They work in the following manner
xxxx 4xxx xxxx is for a left hand steering wheel switch and left hand turn stalk w/o lane keep

xxxx 6xxx xxxx is for a left hand steering wheel switch and left hand turn stalk w/ lane keep

ABS - 760-03-02 0200 0000 0573
Sets the braking to work correctly with cruise control

edit thanks to @TobyGadd for pointing this out. The codes for the ecoboost and hybrid do differ.

BCM - 726-04-05 CB28 8140 8872
Use this code for the 2.0L ecoboost engines. So far there hasn't been any reported issues using this code on hybrids but if you used it originally it is recommended to redo with the code below.

BCM - 726-04-05 CB28 8141 8873
Use this code for 2.5L hybrid engines

This activates the cruise control functionality for XL trims less an FX4 package

TBD
BCM codes for XL trim Mavericks with the cruise control mod and optional if figured out FX4 upgrade.


No IPC codes need to be changed after testing.

 

[RONR11]

Not scan literate so if I tell tech at first to change BCM to the above #’s my hybird should have CC again? Txs Ron

 

[bgn]

Not scan literate so if I tell tech at first to change BCM to the above #’s my hybird should have CC again? Txs Ron

The dealer will not help you change that. Your best bet is either figuring out how to do it yourself or going to the same person that installed it for you.

Sponsored