Prinsu roof rack installed!

Rynobuilt said:

I installed a Prinsu roof rack on my 25 lobo, I'm loving the looks, kind of blending 2 styles together!
you do have to drill 4 holes in the roof, and its not suer easy, but after struggling with the front driver side, I think there is more structure there , or its hardened beam the other 3 where much easier.
I used a 7/16" hole saw to start the first opening hole up, then follow top with a rotabroach type spot weld drill but to get through the remaining metal pieces. there is many layers at the spot on the roof cap. After that use the 7/16" hole saw again to get the lower roof rail trim pieces cleared out, then add some paint to protect it, install the supplied plus nuts, rtv sealant and install.
I had mine color matched and powder coated with color from prismatic colors that is very close to the factory match . With a 400 dynamic weight load and 800 static load rating , these are super strong and can hold about anything these little trucks can haul around!

https://prinsu.com/product/ford-mav...XIvRXKuJMsSTHnls7WO-iHJVUA218lvllSLESGiT63neS

Click to expand...

Frenchy said:

I like the look but it seems to be a work of work to install and it cannot be removed. What are you going to use it for? How does it looks inside?

Click to expand...

Rynobuilt said:

I installed a Prinsu roof rack on my 25 lobo, I'm loving the looks, kind of blending 2 styles together!
you do have to drill 4 holes in the roof, and its not suer easy, but after struggling with the front driver side, I think there is more structure there , or its hardened beam the other 3 where much easier.
I used a 7/16" hole saw to start the first opening hole up, then follow top with a rotabroach type spot weld drill but to get through the remaining metal pieces. there is many layers at the spot on the roof cap. After that use the 7/16" hole saw again to get the lower roof rail trim pieces cleared out, then add some paint to protect it, install the supplied plus nuts, rtv sealant and install.
I had mine color matched and powder coated with color from prismatic colors that is very close to the factory match . With a 400 dynamic weight load and 800 static load rating , these are super strong and can hold about anything these little trucks can haul around!

https://prinsu.com/product/ford-mav...XIvRXKuJMsSTHnls7WO-iHJVUA218lvllSLESGiT63neS

Click to expand...

Rynobuilt said:

I installed a Prinsu roof rack on my 25 lobo, I'm loving the looks, kind of blending 2 styles together!
you do have to drill 4 holes in the roof, and its not suer easy, but after struggling with the front driver side, I think there is more structure there , or its hardened beam the other 3 where much easier.
I used a 7/16" hole saw to start the first opening hole up, then follow top with a rotabroach type spot weld drill but to get through the remaining metal pieces. there is many layers at the spot on the roof cap. After that use the 7/16" hole saw again to get the lower roof rail trim pieces cleared out, then add some paint to protect it, install the supplied plus nuts, rtv sealant and install.
I had mine color matched and powder coated with color from prismatic colors that is very close to the factory match . With a 400 dynamic weight load and 800 static load rating , these are super strong and can hold about anything these little trucks can haul around!

https://prinsu.com/product/ford-mav...XIvRXKuJMsSTHnls7WO-iHJVUA218lvllSLESGiT63neS

Click to expand...

Rynobuilt said:

I installed a Prinsu roof rack on my 25 lobo, I'm loving the looks, kind of blending 2 styles together!
you do have to drill 4 holes in the roof, and its not suer easy, but after struggling with the front driver side, I think there is more structure there , or its hardened beam the other 3 where much easier.
I used a 7/16" hole saw to start the first opening hole up, then follow top with a rotabroach type spot weld drill but to get through the remaining metal pieces. there is many layers at the spot on the roof cap. After that use the 7/16" hole saw again to get the lower roof rail trim pieces cleared out, then add some paint to protect it, install the supplied plus nuts, rtv sealant and install.
I had mine color matched and powder coated with color from prismatic colors that is very close to the factory match . With a 400 dynamic weight load and 800 static load rating , these are super strong and can hold about anything these little trucks can haul around!

https://prinsu.com/product/ford-mav...XIvRXKuJMsSTHnls7WO-iHJVUA218lvllSLESGiT63neS

Click to expand...

Rynobuilt said:

I installed a Prinsu roof rack on my 25 lobo, I'm loving the looks, kind of blending 2 styles together!
you do have to drill 4 holes in the roof, and its not suer easy, but after struggling with the front driver side, I think there is more structure there , or its hardened beam the other 3 where much easier.
I used a 7/16" hole saw to start the first opening hole up, then follow top with a rotabroach type spot weld drill but to get through the remaining metal pieces. there is many layers at the spot on the roof cap. After that use the 7/16" hole saw again to get the lower roof rail trim pieces cleared out, then add some paint to protect it, install the supplied plus nuts, rtv sealant and install.
I had mine color matched and powder coated with color from prismatic colors that is very close to the factory match . With a 400 dynamic weight load and 800 static load rating , these are super strong and can hold about anything these little trucks can haul around!

https://prinsu.com/product/ford-mav...XIvRXKuJMsSTHnls7WO-iHJVUA218lvllSLESGiT63neS

Cation

Click to expand...