Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

[pantera156]

What is the unreal Sync Scheme?

Sponsored

 

[pantera156]

Would you possible be willing to post your as built data from Forscan for the APIM? I cannot for the life of me get everything to work properly. Though I think I have another borked system.

Do you want me to send you my configuration?
Please change the theme, it helps a lot.

 

[yeahiguessman]

Do you want me to send you my configuration?
Please change the theme, it helps a lot.

That would be amazing if you could!

 

[801Maverick801]

After seeing some install pictures from a low level, I was initially worried about the 12 inch transit screen being too tall and impeding view.
I'm 5'8" and these were taken at eye level. It is the perfect height, no issue with view.

 

[pantera156]

¡Sería increíble si pudieras!
[/CITA]

That would be amazing if you could!

I still have that error which I know is because the parking sensor is enabled. But I don't know how to remove it!

 

[RONR11]

I do also, like Bill said just ignore

 

[pantera156]

I do also, like Bill said just ignore

DE07/7D0-08-01: xxxx-xx00-xx--
DE07/7D0-08-01: 0xxx-xxxx-xx--
DE08/7D0-09-03: xxxx-xxxx-x0--
DE07/7D0-08-01: x0xx-xxxx-xx--
DE00/7D0-01-03: x0xx-xxxx-xx--

Solved!

That cancels everything related and there is no more error.

 

[pantera156]

Would it be possible for APIM to show thrips like this?

 

[yeahiguessman]

Unfortunately, on my end I tried two separate APIMs from 2024, two different harness’s, two separate USB cables, and a million different ForScan adjustments, but no matter what I still have audio crackling through Bluetooth or USB audio. Tried an APIM from 2021 running on very old firmware and it worked perfect, but lose some of the newer look and full screen CarPlay. I’ve kind of given up on it as a whole as it seems this mod just doesn’t want to play nice with my ‘24 Hybrid.

Was a fun try though! Cool to get it so close.

 

[Toddman45]

Looks 5x better than the OEM 8" & cubby. I wish a member would sell a pnp harness along with detailed install. As im too lazy to make up my own.

 

[pantera156]

Unfortunately, on my end I tried two separate APIMs from 2024, two different harness’s, two separate USB cables, and a million different ForScan adjustments, but no matter what I still have audio crackling through Bluetooth or USB audio. Tried an APIM from 2021 running on very old firmware and it worked perfect, but lose some of the newer look and full screen CarPlay. I’ve kind of given up on it as a whole as it seems this mod just doesn’t want to play nice with my ‘24 Hybrid.

Was a fun try though! Cool to get it so close.

Could it be that the problem is the ACM and not the APIM?

 

[yeahiguessman]

Could it be that the problem is the ACM and not the APIM?

I just would think it odd that the ACM has no issue with the 2021 APIM or the Mavericks original. Just these two 2024 APIMs.

 

[yeahiguessman]

What software version are you guys running? Both of the 2024 APIMs I had that are acting up are running this one. Trying to figure out if it’s a hardware revision that caused some communication issues with the ACM or a possible software bug. Would be helpful to let others know what to avoid in the future!

 

[Billzilla15]

Would it be possible for APIM to show thrips like this?

I did not have it showing anything until I swapped my gauge cluster to one from a 23 escape. Now they talk to each other and I get all that info

 

[Billzilla15]

What software version are you guys running? Both of the 2024 APIMs I had that are acting up are running this one. Trying to figure out if it’s a hardware revision that caused some communication issues with the ACM or a possible software bug. Would be helpful to let others know what to avoid in the future!

Sponsored