Looking for feedback

[Greg_in_GA]

One thing I forgot was a spray in bedliner. That was not on my order because the factory ones were causing delays.

Sponsored

 

[Jah.]

24 responses and no mention of OEM-styled fog lights??

Nothing available that I have seen . some mentions of ditch lights attached to the Hood hinges .

 

[TheGriffin1313]

Home link Mirror
Under the hood blanket
Fog Lights
The rear cabin wall could be tider with a ABS cover.
WIFI Carplay


As for a truck and what it needs as a truck would be

Tow anchors on none 4x4 versions
Tailgate assist
Higher ground clearance
Larger towing capacity on none 4x4 units
Manly tires vs the sippin gin and juice tiers that come with it stock


These are some of the top of my head.

 

[Hippestgoldfish]

First Purchase: Tonneau Cover
Second Purchase: Floor Mats
Third Purchase: Bed Tie down hooks
Fourth Purchase: Wireless Carplay adapter

After that in no particular order: Tailgate lettering, interesting FITS stuff if I find any, backseat dog protector,

Moonshot that will probably not happen: Tent on top of Mav

 

[OleFordGuy]

Bed rug
Red Line hood struts
Craven Speed stubby antenna

 

[TCPTX65]

Honestly, since I'm getting the Atlas Blue, my next purchase after the cover and liner will be chrome accents. I think they will pop on that metallic blue.

Great minds think alike! Looking at the same for my Velocity Blue XL. I'm thinking chrome door handles and stainless steel nerf bars so far.

 

[wax87]

I know a lot of Maverick owners tend to be first-time truck owners and as such are unfamiliar with accessories that are offered for their new vehicle
When it comes to your new Maverick what are your first thoughts on add-ons to make this truck your own?

I know a lot of people start off with tonneau covers to keep the bed covered and items in the bed secured. But going from there what would your next item be? I want to make sure that we can assist as best as we can with not only questions you might have but also offer help on finding the best product for your needs at a price that cannot be beaten.

Being such a newer truck to the market some manufacturers are still catching up in trying to release products, and with how hard it has been for you all to get them and the periods of time you have had to wait, our manufacturers are feeling the same pain. Customization is coming!

I am not totally familiar with your products, but what about a more robust under carriage, and one that you can partially remove for oil and oil filter changes?

 

[Sembazuru]

My plans are first to get a spray in bedliner, probably going with a local Line-X (I've gotten quotes from local Line-X, Rhino, and Bullet shops) and color match to the orange accents in my XLT Lux (see .sig, below) package. And then add a cover (probably BAK X4s). Also will get some 3rd party all-weather floor mats, currently thinking the 3D Mats Kagu set.

After that, I have a few other items that I've been building in an Amazon wishlist. I think the pressed MAVERICK lettering in the tailgate look unfinished so tailgate lettering is high on the list. But I'm not sure if I'll go with matte black to match the other black trim and be subtle, or chrome to match the Ford oval and pop against the Atlas Blue paint.

Other things in my wishlist are (in no particular order):

• Tailgate assist
• Hood strut shocks
• Vertical cargo mesh net
• Mud flaps/splash guards front and rear
• LED bulbs for the backup lights
• Hood deflector
• Screen protector for the 8" touchscreen
• CDEFG center console organizer (with orange trim)
• Trailer hitch cargo carrier

I want in-channel window vent covers, but I haven't found any on the market for the Mav yet (hoping WeatherTech finally release a set by the time I get my Mav).

I may put in additional bed lighting (LED strip under the side rails), especially if I can figure out how to hack them into the Lux bed-lighting switch. Hopefully my experience as an electronics tech can help me figure out the wiring.

I'm getting a front license plate bracket in a state that doesn't require front license plates so I can have a custom name plate in the front. (Currently thinking Samwise as the name.)

I also have a 3D printer, so there may be some things that I print for the FITS mounts and the center console cubby.

 

[Lordran_Hollow]

Biggest thing I'm hoping for is that someone comes out with a dash kit for one of the modular Pioneer radios so that I can update the radio in the vehicle. That's one of my biggest priorities aside from tonneau.

I also bought the OEM drop-in liner in preparation since they said the liners were constraints. Wasn't expecting to receive the drop-in liner 2 days after I ordered it.

 

[HybridOnOrder]

1. Maverick paint match colored kits for for the grill trim
2. A pc of trim that you can install DIY like the Ford has, like this, (for less) -

 

[Stumblios]

all i want is a full length roof rack, not cross bars but a full rack.

 

[Jonny44]

A decent headache rack to protect the backglass. LED accents. Seat and door protectors (for the dogs). Winter wheel/tire combos. Fender flares. Skid plates.

 

[Ron Neal]

I know you and other suppliers have them. I would like to put on running boards when my truck arrives. I have asked but have not got an answer yet if anyone has put on a pair without any drilling or fabricating. A hole or two is OK, but this old man can't take too much crawling around on a cement floor to install running boards.
So, all you vendors, if your product mounts or installs without fabrication or extra changes to the truck, please say so in your product description, as some do.

I didn't need running boards on mine and I am no spring chicken.

 

[commadorebob]

• Screen protector for the 8" touchscreen

I'd love to know the thought process behind this. Given the screen is mounted, there isn't much opportunity for the screen to be damaged.

 

[Spook]

I didn't need running boards on mine and I am no spring chicken.

I didn't say I needed them for me; read my post again. They are for someone that needs them.

Sponsored