Has anyone used ForScan yet?

[MavTruk]

Loaded it up tonight and was snooping around the modules but unlike my F-150 there's no "easy mode" obviously since its so new...With that being said has anyone actually figured anything out yet? I would like to disable auto/start stop and the hyper flash from my lights I installed like I had also done on my F-150

Sponsored

 

[Papito]

Loaded it up tonight and was snooping around the modules but unlike my F-150 there's no "easy mode" obviously since its so new...With that being said has anyone actually figured anything out yet? I would like to disable auto/start stop and the hyper flash from my lights I installed like I had also done on my F-150

Following this post. Hopefully we get more info sometime soon.

 

[bgn]

Would love to know if it's possible to add Eco and Sport modes to the FX4.

 

[Darksider]

Screen shots of menus would help those that dont have there cars yet...

 

[MimiE]

Loaded it up tonight and was snooping around the modules but unlike my F-150 there's no "easy mode" obviously since its so new...With that being said has anyone actually figured anything out yet? I would like to disable auto/start stop and the hyper flash from my lights I installed like I had also done on my F-150

IS the hyper flash because of a CanBus situation? You can fix that with canbus decoders if you can't get there with ForScan.

 

[EMD_Driver]

Also following. Ordered forscan hardware today. Just hoping it'll work on my Maverick and F-350.

 

[JUrban]

Loaded it up tonight and was snooping around the modules but unlike my F-150 there's no "easy mode" obviously since its so new...With that being said has anyone actually figured anything out yet? I would like to disable auto/start stop and the hyper flash from my lights I installed like I had also done on my F-150

Have you been able to make any changes successfully? Was trying to turn off auto/ss in the PSCM module hex editor, but can't get the write to take.

 

[Pizzacat_69420]

Alright, So here's what i've collected so far on vins for different configs. Some haven't been built yet, but some have.

2022 maverick VIN list for various option packs

You will need the following links probably at some point:
To get .ab files
To compare up to 4 .ab files - basic
FORSCAN Tutorial for those that haven't seen it
VIN to get Ford Window Sticker
Auto-start stop disable in '21 Bronco Sport
Most current link to As-built hacker - xml set up for f150
video on how to use as built hacker

You can use the list of valid vins to compare as builts.

 

[EMD_Driver]

Anyone been brave enough to dive in to the Maverick yet?

 

[Aherpa]

Anyone been brave enough to dive in to the Maverick yet?

Will the use of ForeScan cause warranty issues?

 

[aspect]

I'm going to give it a shot in the next day or two

 

[EMD_Driver]

I'm going to give it a shot in the next day or two

Me too... We should compare notes..

 

[aspect]

Ok! Got it fired up and poked around a bit. My first goal is to enable sport mode on my FX4 (and hopefully figure out the settings for enabling/disabling all modes on any trim). There's a bit different structure for drive modes from the F150 and from the new Bronco, and I haven't found anyone on the 2020 Escape or Bronco Sport forums that's figured it out for theirs.

Could anyone with a non-FX4 maverick post their VIN? With that we can read the original as-built settings using the ford service website. Alternatively you can go to https://www.motorcraftservice.com/AsBuilt/, put in your VIN, and tell me what it tells you for line 760-04-03.

Thanks!

Edit: I am dumb, there's a list of VINs like 4 posts up. Looks like FX4 is 0000 0001 E150 and non-FX4 is 0000 0000 6BD9.

On the F150/Super Duty one of the first values is used to set which configuration of drive modes that vehicle has. However, on the new Bronco fullsize, it looks like each mode can be toggled on and off individually. (https://www.bronco6g.com/forum/threads/2021-bronco-forscan-thread.844/page-15#post-963234)

It seems like there's a 0 for both FX4 and non-FX4 in the first block so likely we are just looking at the last couple characters on the Maverick.

 

[bgn]

Ok! Got it fired up and poked around a bit. My first goal is to enable sport mode on my FX4 (and hopefully figure out the settings for enabling/disabling all modes on any trim). There's a bit different structure for drive modes from the F150 and from the new Bronco, and I haven't found anyone on the 2020 Escape or Bronco Sport forums that's figured it out for theirs.

Could anyone with a non-FX4 maverick post their VIN? With that we can read the original as-built settings using the ford service website. Alternatively you can go to https://www.motorcraftservice.com/AsBuilt/, put in your VIN, and tell me what it tells you for line 760-04-03.

Thanks!

Edit: I am dumb, there's a list of VINs like 4 posts up. Looks like FX4 is 0000 0001 E150 and non-FX4 is 0000 0000 6BD9.

On the F150/Super Duty one of the first values is used to set which configuration of drive modes that vehicle has. However, on the new Bronco fullsize, it looks like each mode can be toggled on and off individually. (https://www.bronco6g.com/forum/threads/2021-bronco-forscan-thread.844/page-15#post-963234)

It seems like there's a 0 for both FX4 and non-FX4 in the first block so likely we are just looking at the last couple characters on the Maverick.

Having Eco and Sport on the FX4 would be super awesome!

 

[aspect]

Alright, well...may have found something here. The F150 drive modes follow this format, even though the register is different:

Sponsored