Front passenger door is inset / not level with the A-pillar

[bluelobo26]

Back in “The Day” you could also get a fully loaded 69 Chev Camaro 302 Zapper, 4-speed Muncie for under 5 Grand, but….. times have changed. I expect more now from a truck that cost me $40,000 (CDN)! Am I wrong?

I hate to burst your bubble, but $5,000 in 1969 was the equivalent of $42,893.40 CAD today.

Sponsored

 

[MaverickDragon]

My driver’s door is wonky. Opens with a bit of a ”pop”, and sometimes you have to close it twice to get it to latch. After examining the rest of the body, I’ve decided that this thing wasn’t assembled to Rolls Royce fit and finish standards. Or Subaru fit and finish standards.

The pop on open and difficulty to close sound like the behind the rear seat vent may be stuck closed or have something blocking it, as that's why it's there...

 

[Chops]

I hate to burst your bubble, but $5,000 in 1969 was the equivalent of $42,893.40 CAD today.

Could have bought a new Ford Ranger in 1969 for half that price.
$21.5k CAD in todays dollars?

 

[Meeka]

I hate to burst your bubble, but $5,000 in 1969 was the equivalent of $42,893.40 CAD today.

No bubble burst bud, I knew that. I’m your age or older.

 

[Waterick]

I see you also have a 2024, maybe they had a mis-calibrated machine or something similar when doing a run of trucks. Mine was built October of 2024.

November 24 is my build date. Ill post up some pics later today. I just noticed this last week at the carwash.
maybe causing some additional wind noise as well.

After seeing your build dates, I had to check how mine looked as I have an in production date of 31 Oct 2023 on my '24 Lariat. I think it looks as good as any. Both sides seem the same. Maybe the QC was a little tighter on the Lariats?

to for

 

[BuiltFordTough?]

Mine is the same, built in August of 2024.

 

[Glen Baker LLC]

I have a build date of 01-23 XLT and everything is fine. On a mass production line, Jose doesn't say to Miguel, Here's a Lariat let's do everything muy Bueno.
It could be the forming dies are starting to show their age and wear?
In reality that would be premature wear.
Door stamping dies should last 500,000 to several million hits.

 

[Mudduck]

I have a build date of 01-23 XLT and everything is fine. On a mass production line, Jose doesn't say to Miguel, Here's a Lariat let's do everything muy Bueno.
It could be the forming dies are starting to show their age and wear.

Well Sir, I believe that Hose-A and Hose-B had a plan and executed it flawlessly. We were punished for buying the Peasant trims...

 

[Glen Baker LLC]

Well Sir, I believe that Hose-A and Hose-B had a plan and executed it flawlessly. We were punished for buying the Peasant trims...

We do not have peasant trim.
We are XLT owners.

Maverick classes.
Lariat owner..............................XLT

.................................................... xl owner's

 

[BK007]

 

[Fcnrwy]

We do not have peasant trim.

Maverick classes.
Lariat owner..............................XLT

.................................................... xl owner's

More then Happy to have the Peasant trim...
At least no one wants to take our heads off..
Oh Wait ! WE Did that to the Lariats...

I looked at my 2022 (October 31, 2022 build) peasant, I mean XL trim..
I do have a slight deflection on the Driver's side passenger door. The top back corner is not flush. It's only about half of the OP's.
Having some bodywork experience over the years, there usually us some wiggle room, in door mounting.
Mine appears to be a door that was bent on manufacturer. Being it's location.

Jerry

Sponsored