Front License Plate Holder

[Deleted member 37911]

Ok, I have a simple question about the factory front license plate holder. I've been looking at several Mavericks online searching for a decent deal on a 2024. I found one about 2 hours from where I live. But much to my chagrin, in the online pictures it has a factory front license plate holder which I despise since my state doesn't require them. My question is, if I remove it are there going to be ugly bolt holes in the front bumper? I don't want to drive to look at this truck only to find it does have holes in the bumper. I do not want a front license plate! Thanks!

Sponsored

 

[Glen Baker LLC]

Yes
If it has a front plate holder, it will have holes in the bumper if removed.

 

[Exranger]

Get some flat round plastic clips, paint them with touch up, and stick them in. I too love the clean plateless look…

 

[MvrkECWI]

Another "feature" that should only be an option.

 

[boe757]

4 holes, I installed mine, slight dimples for the locations

 

[Glen Baker LLC]

Another "feature" that should only be an option.

I don't believe they install a front bracket in a state that doesn't require a front license plate.

 

[PGAJayhawk]

The 2025 will have 3 holes in the painted bumper if removed.

 

[Hcopter]

Ok, I have a simple question about the factory front license plate holder. I've been looking at several Mavericks online searching for a decent deal on a 2024. I found one about 2 hours from where I live. But much to my chagrin, in the online pictures it has a factory front license plate holder which I despise since my state doesn't require them. My question is, if I remove it are there going to be ugly bolt holes in the front bumper? I don't want to drive to look at this truck only to find it does have holes in the bumper. I do not want a front license plate! Thanks!

Here's the thread where I removed mine, so you can see what to expect.

https://www.mavericktruckclub.com/forum/threads/front-license-plate-bracket-removal.35177/

 

[Deleted member 37911]

Thanks, I don't know why the bracket was a free option on this truck in Tennessee...otherwise I love the truck and want to buy it!

Here's the thread where I removed mine, so you can see what to expect.

https://www.mavericktruckclub.com/forum/threads/front-license-plate-bracket-removal.35177/

 

[BobG78]

The license plate holder is dealer installed. I told the dealer if they drilled holes in my special ordered XL that I wouldn't purchase it.

A front plate is "required" in CA, I mounted a sto n sho on mine.
https://www.amazon.com/STO-SHO-Comp...late+holder+2024+ford+maverick,aps,185&sr=8-1

 

[Deleted member 37911]

The one I saw was on the window sticker under options at N/C

The license plate holder is dealer installed. I told the dealer if they drilled holes in my special ordered XL that I wouldn't purchase it.

A front plate is "required" in CA, I mounted a sto n sho on mine.
https://www.amazon.com/STO-SHO-Compatible-2022-2023-Maverick/dp/B0CH3SLJ7B/ref=sr_1_1?crid=3A58Y9ATN3UJL&dib=eyJ2IjoiMSJ9.9q_GLfuXt6a0jAJyTvKE1MPu6vouYdLkPGXVKc6qRRzZKbuvg666SdcgGZ4ZZNOht4iW1ZT6gZWt6XW9NA-AAq8ajuIll0_W98FtJ_iXLC-HbJk7l7nboFM5dHvt7rYyZzNzlfEV2bAOb-qIdpdhqCxN3IqBt16ACAAzGeNFXhrkmwfZrSkpSIod49IweCEj5Ci3ZqwILf2KsOi8b9Oy222GWoojuGzSTlfFK6Rb0XG0UpB8AzOdacpCGcvFnu6L7GdgMIidBVj7Ow8HAK-nI6LOUM7nvk7PMT8vO3g23BI_SZASWDJkHZA1G2p4AOkqhDNmww5polU0gPMh86siqTqJksnOF5I4iKLCdTDm2YbDnxdsqaFftx-o6njy27-qxAKsMrsnYgd7d1i9Js2L-shlSKL-sEC4c-6XeoTBk40UgWG1CQOn1yDBCDrEId_t.amzYSi-_u7kjTE3fl1JyvtWkGZLY5WYMFikER2Nt5xc&dib_tag=se&keywords=stow+n+show+license+plate+holder+2024+ford+maverick&qid=1735781134&sprefix=stow+n+show+license+plate+holder+2024+ford+maverick,aps,185&sr=8-1

 

[White Thunder]

Yes
If it has a front plate holder, it will have holes in the bumper if removed.

That should be common sense.

 

[White Thunder]

Ok, I have a simple question about the factory front license plate holder. I've been looking at several Mavericks online searching for a decent deal on a 2024. I found one about 2 hours from where I live. But much to my chagrin, in the online pictures it has a factory front license plate holder which I despise since my state doesn't require them. My question is, if I remove it are there going to be ugly bolt holes in the front bumper? I don't want to drive to look at this truck only to find it does have holes in the bumper. I do not want a front license plate! Thanks!

I now live in Oklahoma, where there is only one plate required. I moved here from Colorado, where they have two plates. I took care of my front plate problem this way.

 

[shrek]

I ordered my trucklet from Granger Ford In Iowa. I told Chip (My online Salesman) over and over to NOT install the front plate bracket. When I went to pick it up, he said "I threw it in the trash so they would NOT install it." Gotta love Granger. They listen and are AWESOME!!!!!

I live in IL It is required. BUT and its a HUGE BUT; It is not an offense that they can pull you over for.
But, If you are speeding or do some stupid $H!T; they can add that to your ticket. Dont Do STUPID SHIT; and you are GTG.

 

[FreedomPenguin]

I ordered my trucklet from Granger Ford In Iowa. I told Chip (My online Salesman) over and over to NOT install the front plate bracket. When I went to pick it up, he said "I threw it in the trash so they would NOT install it." Gotta love Granger. They listen and are AWESOME!!!!!

I live in IL It is required. BUT and its a HUGE BUT; It is not an offense that they can pull you over for.
But, If you are speeding or do some stupid $H!T; they can add that to your ticket. Dont Do STUPID SHIT; and you are GTG.

He told me they don’t install it but I had to sign that e digital thing first thing was install the plate on front
I told him please god please don’t install front plate
Ohio dropped front plate law too so yay

Sponsored