It takes a while for the habit of trying to to catch it wears off.
"Backin15" Problem solved
Like many here, I added a tailgate strut and then the tailgate won't close with the stock tiedown bracket in place. So I made one out of scrap metal I had in a bin and posted it in my build thread here, and others asked if I'd be interested in making a few more. I have a few of these available.
The steel is thicker than it needs to be, 1/8". Cut, bent, drilled & chamfered, corners radiused, welded, sanded, powdercoated, and shipped to your door for $20 each. Add $5 for a flat shipping cost and that covers anything else that you may want to purchase at the same time as well (see my signature for the other items I make & offer).
Because I make these one at a time by hand, my welding may not look as perfect as one that comes out of a factory in China. But it is well-built and solid and it works like it should, and of course, it's made in the USA.
PayPal is strongly preferred, but if you don't have PayPal and need me to list one for purchase on eBay, I can do that as well. If you have an interest, please send me a private message (don't post to this thread). The amount is limited. Be aware that I'm not a fabricator. I make things because I enjoy making things. And because some accessories just cost too much, and they shouldn't.
My thanks go to @Dean S (his thread here) who came up with this outstanding minimalist design and shared it with us.
Has nothing to do with weight.
