Best accessories you've added to your Maverick?

[NoVaJimmy]

Best thing I added to my Maverick was a leather steering wheel from a Bronco Sport. The urethane wheel that came stock seemed like some kind of torture device and the leather wheel feels great.

Sponsored

 

[skadizzle]

What are the best accessories you have added to your Maverick?

I have added hood and tailgate shocks, 1" leveling kit bigger wheels and tires. Nerfbars and Fender Flares Hood and Rear Cab Spoiler, Tonneau cover, Overlanderrack seat covers bug and door deflectors, red L.E.D. inner bed lights. White bed cargo light, tailgate lock tailgate decals and lettered xl side badge. Stubby antenna, tinted windows. Best of luck on your Journey.

That's a special edition I haven't heard of.

 

[Slyder6665]

It's the edition of I don't care what people think. I work with guys that have $60,000 dollar trucks and still not as sexy as Tish.

 

[Captain Blackheart]

Some might think it a bit busy, but I added a pair of Ecoboost decals to the hood to compliment the blackout decal. Rocky Mountain Graphics on ebay. They're a Ford licensed product. Something different.

 

[MaverRick]

Just got my letters from the OEM Ford parts outlet but they charged my Visa card instead of using my Fordpass points! No worries, this has happened before with them and they refunded the money back. The best thing I have done so far was my retro mod to get the digital LED hvac displays that IMO should have come from the factory!!!

 

[emu_missing]

T
There brushed aluminum. Made them at work

Is there a place to download the custom font (letter shapes) ?

 

[MrCigar]

Just printed this bracket for the cubby. Having my phone so far down wasn’t working for me. Other than that I also printed a holder for my garage door opener which was the best thing I’ve done. 3D Maxpider floor mats are great as well.

Love those mats, I want to order those next!

 

[mhw21zap]

Best thing I added to my Maverick was a leather steering wheel from a Bronco Sport. The urethane wheel that came stock seemed like some kind of torture device and the leather wheel feels great.

What was the process of swapping it out like? Do you mind sharing which model you ordered from the Bronce Sport to swap on the Maverick? I have an XLT Hybrid - thanks!

 

[NoVaJimmy]

What was the process of swapping it out like? Do you mind sharing which model you ordered from the Bronce Sport to swap on the Maverick? I have an XLT Hybrid - thanks!

Came off of a Bronco Sport Big Bend according to the listing on car-part.com, super simple process, disconnect the battery, wait a while to discharge the SRS and then undo a couple of hooks on the backside of the steering wheel holding the airbag in, remove the airbag and then the airbag connectors, I think it was a 15/16ths bolt holding the steering wheel in and then reverse. Of course make sure you find some official Ford workshop procedures or something if you plan on doing it yourself since the airbag system can be dangerous but if you can use a flathead screwdriver and a ratchet set it's super easy. I believe all the steering wheels from the 2020-current Escape, 2021-current Bronco Sport and Maverick are interchangeable. You can swap over the controls on your current steering wheel, just keep in mind that if you have the Lux package with heated wheel you need to find one out of a model with a heated wheel and some of the Bronco Sport and Escape wheels have paddle shifters on them which at this point won't work on the Maverick so you may not want them there.

I purchased mine before people really figured out that you could add factory cruise control to XL models and that the wheels between those models were interchangeable so I got mine for really cheap, most seem to go for 200-300 now but I'm sure if you look hard enough you can find something cheaper. Also, there are a few videos on youtube documenting the process, you should use that as a resource.

 

[mhw21zap]

Came off of a Bronco Sport Big Bend according to the listing on car-part.com, super simple process, disconnect the battery, wait a while to discharge the SRS and then undo a couple of hooks on the backside of the steering wheel holding the airbag in, remove the airbag and then the airbag connectors, I think it was a 15/16ths bolt holding the steering wheel in and then reverse. Of course make sure you find some official Ford workshop procedures or something if you plan on doing it yourself since the airbag system can be dangerous but if you can use a flathead screwdriver and a ratchet set it's super easy. I believe all the steering wheels from the 2020-current Escape, 2021-current Bronco Sport and Maverick are interchangeable. You can swap over the controls on your current steering wheel, just keep in mind that if you have the Lux package with heated wheel you need to find one out of a model with a heated wheel and some of the Bronco Sport and Escape wheels have paddle shifters on them which at this point won't work on the Maverick so you may not want them there.

I purchased mine before people really figured out that you could add factory cruise control to XL models and that the wheels between those models were interchangeable so I got mine for really cheap, most seem to go for 200-300 now but I'm sure if you look hard enough you can find something cheaper. Also, there are a few videos on youtube documenting the process, you should use that as a resource.

Thanks so much for the all the great info - I really appreciate it!

 

[Nunyabiznus]

Is there a place to download the custom font (letter shapes) ?

No took a picture of the tailgate. Then had the guy that does are art work on the computer cut them out on some paint masking. Took about three tries adjusting them to fit right. Then cut them out of .063 brushed aluminum on our cnc router

 

[NGeezy]

@VampireOnline any chance you can share the 3d print file for the cubby. Also not sure what you printed for the garage holder but would be cool if you could share that one too!

Just printed this bracket for the cubby. Having my phone so far down wasn’t working for me. Other than that I also printed a holder for my garage door opener which was the best thing I’ve done.

 

[junlin]

Maverick tailgate letters.

 

[Enchalada]

@VampireOnline any chance you can share the 3d print file for the cubby. Also not sure what you printed for the garage holder but would be cool if you could share that one too!

I got one made by AkroHD

 

[maggy55]

A few picks of my mods.

Sponsored