2025 XLT remote start with Cheap replacement key fob

[Cancunbadlands]

It says 315MHZ
It's a Lariat Tremor, no start button, with keyless easy entry so... what you say?

@LarryTheLariat

Sponsored

 

[Larry the lariat]

You need to check what frequency your on before ordering anything

My dealership is far and from I've read you need to go to them and show them proof for any keys related info.

Don't you have a key fob with a sticker on the back?!

I've had the car for over 2 years now so that sticker is long gone. I'm going to check in the footwell like someone said earlier and see if it has information I need.

 

[Cancunbadlands]

My dealership is far and from I've read

I've had the car for over 2 years now so that sticker is long gone. I'm going to check in the footwell like someone said earlier and see if it has information I need.

Let us know!

 

[Larry the lariat]

The key code is printed on the sticker on the BCM (near the passenger floor fuse panel) perhaps the frequency is on that sticker as well?).

I didn't see the MHz and don't really know what the key code looks like. Maybe someone else will check and find it, and they can point me in the right direction

 

[MakinDoForNow]

I didn't see the MHz and don't really know what the key code looks like. Maybe someone else will check and find it, and they can point me in the right direction

It was posted the MHz is not on the BCM label. The key code is the five digit number. The key code is the number you enter in when you are programming a new Keypad, or fob if you do not have two key fobs that are already programmed. You can also display the key code on the dash if you have a programmed fob. (I don't remember the steps but their was a thread on how to do it). The MHz's are vin # specific and there was some 22's &/or 23's that got different MHz's TPMS during chip shortages.

 

[BlueSpec1]

I didn't see the MHz and don't really know what the key code looks like. Maybe someone else will check and find it, and they can point me in the right direction

If you remove the manual key out of the key fob, probably can see the ford PN as well as FCC ID
Plugging in FCC ID into google or https://fccid.io/ can pull up some hits of it and frequency.
*the FCC site seems to be on its last legs, half the time doesn't work.

My Escape's key fob JL1T-15K601-BC, FCC ID M3N-A2C931426 pulls up info that matches its QR code frequency of 902MHz:

 

[Larry the lariat]

If you remove the manual key out of the key fob, probably can see the ford PN as well as FCC ID
Plugging in FCC ID into google or https://fccid.io/ can pull up some hits of it and frequency.
*the FCC site seems to be on its last legs, half the time doesn't work.

My Escape's key fob JL1T-15K601-BC, FCC ID M3N-A2C931426 pulls up info that matches its QR code frequency of 902MHz:

Great info! I plug my info in, and I'm seeing 314.95MHz. So the key that I ordered is not the correct one. I'm going to try to find the correct key and see what I can do. Hopefully, what @Quest stayed earlier that the "2x" will work without the module.

 

[Cancunbadlands]

Great info! I plug my info in, and I'm seeing 314.95MHz. So the key that I ordered is not the correct one. I'm going to try to find the correct key and see what I can do. Hopefully, what @Quest stayed earlier that the "2x" will work without the module.

It's a 315MHZ for me as well please be kind and let me know if you find the correct key fob!

 

[Larry the lariat]

It's a 315MHZ for me as well please be kind and let me know if you find the correct key fob!

Yea, I found it. Comes in on Sunday lol. It's cheaper than the one from Ali express too. The is link is HERE. If you want to wait until I try it out, I should let you know on Sunday

 

[Cancunbadlands]

Yea, I found it. Comes in on Sunday lol. It's cheaper than the one from Ali express too. The is link is HERE. If you want to wait until I try it out, I should let you know on Sunday

Perfect TY let me know on Sunday #funday

 

[Larry the lariat]

Perfect TY let me know on Sunday #funday

Added the key. The buttons work. The remote start does not and neither does the proximity sensor.

 

[Cancunbadlands]

Added the key. The buttons work. The remote start does not and neither does the proximity sensor.

Oh oh @Quest is it because the 315MHZ??????

 

[Quest]

Oh oh @Quest is it because the 315MHZ??????

Not sure, like I said I I have not tried with older models ,tried on my 2025 & it worked.
Maybe a key vendor problem or you need to turn on remote start with Forscan

Remote start was already active in my 2025 cluster options , are yours?
The proximity thing seems odd that part should work

 

[Cancunbadlands]

Not sure, like I said I I have not tried with older models ,tried on my 2025 & it worked.
Maybe a key vendor problem or you need to turn on remote start with Forscan

Remote start was already active in my 2025 cluster options , are yours?
The proximity thing seems odd that part should work

@LarryTheLariat what year do you drive?

 

[Larry the lariat]

@LarryTheLariat what year do you drive?

2023 Lariat

Sponsored