100+ bed tonneau cover aftermarket options - compilation list 📃

[EffNo50]

Put together a list of over 100 tonneau covers listed to fit the Maverick of all types including soft and hard, rolling and folding. Still no single hard, hinged cover color matched or otherwise available. Hopefully it is useful to someone else. What did I miss?



I'm leaning toward a the BAK hard rolling cover from Ford accessories using points from the recent purchase of my 2025 Velocity Blue XLT along with the 20% off discount code (shop265, are there any better right now?). Any opinions? yeah or nay on this?

Love the effort. I also wish there was a color matched, or white in my case, hard cover as black absorbs too much heat. I also want tracks, preferably built-in. I'm not dead set on rolling, but a folding one would need to not cover 1/3-1/4 of the already short bed when fully open or BLOCK the 3rd brake light!

This would be great in a sortable/filterable spreadsheet. For example I know I don't want a soft cover, filter those out, then sort by price.

Sponsored

 

[Darklyter]

Noice!

 

[rk06382]

UnderCover Fusion Hard Folding Tonneau Cover Is available in white & other colors.

Love the effort. I also wish there was a color matched, or white in my case, hard cover as black absorbs too much heat. I also want tracks, preferably built-in. I'm not dead set on rolling, but a folding one would need to not cover 1/3-1/4 of the already short bed when fully open or BLOCK the 3rd brake light!

This would be great in a sortable/filterable spreadsheet. For example I know I don't want a soft cover, filter those out, then sort by price.

 

[EffNo50]

UnderCover Fusion Hard Folding Tonneau Cover Is available in white & other colors.

Thank you. I've looked and not found it before.

Now does it not block the 3rd brake light, and does have tracks for that $1800!! ?

 

[rk06382]

Thank you. I've looked and not found it before.

Now does it not block the 3rd brake light, and does have tracks for that $1800!! ?

Ask RealTrucks.

 

[Darryl]

I've only owned one pickup truck and it was a small Toyota that I never added a tonneau cover to, so I have no experience with the covers. I'm planning on purchasing a 2025 Maverick soon that I do want to fit with one of these covers. Out of all of the different types and brands, I'm looking for advice on one that is a hard type (aluminum?) and generates the least amount of wind noise and water infiltration. Thanks for any recommendations you all might have.

I purchased the Rough Country tri fold flip that opens enough to uncover virtually all the bed if necessary. So far . So good. As for leaks, I do see a few drops when I go through a car wash. But it remains dry in normal rain. I think it's good for the price. Installation took about 30 minutes once I figured out the instructions.

 

[Dr.Me]

Just picked up the RC hard trifold for a smoking deal of $400! didn't didn't use a bunch of the weather stripping it came with, just the bulkhead part. Specifically wanted this one and got lucky when I found it on FB marketplace brand new still in the box! You can find a lot of used tonneau covers for cheap also.

 

[Master Blaster]

Missing the Bison Hard Trifold Flip-up for CDN$679 or US$488. I can't believe that people are paying two and even three times as much for exactly the same made-in-China product with other brand names on them. Some of them even state made-in-USA and they are exactly the same product, right down to the last clip.

 

[Master Blaster]

Do they have a website or Ebay/Amazon? Do you have it on your Maverick and if so how much water gets in? I am going today to pay the shipping to return the Worksport, yeah return shipping is on me even though they agreed it doesn't fit correctly, so looking at the NEXT attempt. If you have any pictures I would really appreciate it.

I'm not sure that they have it on Amazon or Ebay, as I installed it at the factory about an hour away from me. They even installed it for free. The only water intrusion that I get is a cupfull in a carwash from the tailgate side gaps, not the tonneau. That cupfull is inherent in the wide gaps in the tailgate design.
https://bisontonneaucovers.com/coll...averick-flip-back-hard-tri-fold-tonneau-cover

 

[mitch8080]

I wanted to get this.. because a friend got one for 350 dollars on his 24 xlt a few months ago from rough country.

but the same one is 699 now… is this tariff related or did I miss a sale that I should wait for?

 

[gzmn5m]

https://softopper.com/products/?page=1

https://fas-top.com/traveler-soft-topper/

 

[gzmn5m]

https://softopper.com/products/?page=1

https://fas-top.com/traveler-soft-topper/

I think both have tonneau only options. Soft roll up

 

[Edge Haley]

The Gator SFX trifold isn't on there, which is a soft-trifold cover.

May have been discontinued....The Gator SFX is what I have and zero issues for $280. If you do not have to get into the bed very often and open the tonneau a tri-fold works well. Taking the Gator off and on is a 10 or 15 minute job...just have to line it up and tighten it back down. I find the tri-fold are convenient....I've only had to take mine off once since installed.

I called the Tri-Fold retailer and the SFX is still available but went up to $480+- after tariff taxes added....inventory prices are in limbo due to tariffs.

 

[ListedGuru]

I'm not sure that they have it on Amazon or Ebay, as I installed it at the factory about an hour away from me. They even installed it for free. The only water intrusion that I get is a cupfull in a carwash from the tailgate side gaps, not the tonneau. That cupfull is inherent in the wide gaps in the tailgate design.
https://bisontonneaucovers.com/coll...averick-flip-back-hard-tri-fold-tonneau-cover

So are these Bison tonneau covers made in Canada? Looks like only a (2) year warranty which seems a little on the low end compared to some others.

 

[ListedGuru]

May have been discontinued....The Gator SFX is what I have and zero issues for $280. If you do not have to get into the bed very often and open the tonneau a tri-fold works well. Taking the Gator off and on is a 10 or 15 minute job...just have to line it up and tighten it back down. I find the tri-fold are convenient....I've only had to take mine of once since installed.

Your talking about the Gator SFX tri fold soft cover:

https://realtruck.com/p/gator-sfx-t...-vkZQtXzRjnY6I5SV3NpOWKUoJWEQrukQHwbBVzysmUW7

I'm still in the research faze and trying to figure out what type to go with and my budget. I know several people recommend a hard cover for various reasons but that means more money too and I'm cheap (errr I mean thrifty).

Sponsored