send a picture of this screen!
Tried it and it did not work for me on a 24 Ecoboost FX4 XLTCheck this out! This is worth a try and you can always change it back if it doesn't work! This is also from the F250 Forums. EDIT: THIS DOES NOT WORK. The coding must be different for the maverick.
Yeah I tried the turn signal change and it didn't work either.
He is talking about the turn signal coding.
Yes, it is a hybrid thing - it goes away by itself without delay and no need to press OK. I'm guessing its for people who turn their hybrids on and no engine start, so they sit there haha.
Hello everyone!
I finally found the way to disable the ANNOYING Seatbelt information screen that comes on when you start the truck and stays on even after you buckle your seatbelt. Thank you to @ZOODAD over on the F250 forums for the coding information. THIS SUPER DUTY spreadsheet he put together might be useful for future MAVERICK FORScan Mods.
DISABLE SEATBELT INFORMATION SCREEN
1. Open IPC AS BUILT
2. Change line 720-13-01 and 720-13-02 to ALL ZEROS. And WRITE the changes. Click yes to let Forscan correct the checksum.
3. Change line 720-14-01 and 720-14-02 to ALL ZEROS. And WRITE the changes. Click yes to let Forscan correct the checksum.
These coding changes worked for my 2024 Maverick XL AWD ECOBOOST. These changes remove the seatbelt info screen pictured below entirely and it also seems to disable the seatbelt chime too. I would love to hear from other members to see if these changes work in your Maverick! Also, I have the smaller instrument cluster. (The 4 inch Instrument Cluster)
EDIT:
If you would like to keep the Minder (the dash light and chime) and not the Monitor (the seatbelt screen) I would suggest doing the following coding based on this 2023 Maverick HEX code spreadsheet and my original coding in my Maverick. CONFIRMED WORKING by @Mavrik23
720-13-01 9100 0001 8000
720-13-02 0110 1000
720-14-01 1000 0000 0000
720-14-02 All Zeros
2ND EDIT: Here is a link to 2 more changes I just found DISABLE DOOR AND KEY CHIMES
I have found and tested two more codings that work for My 2024 Ford Maverick XL AWD ECOBOOST
DISABLE DOOR CHIMES
1. IPC AS BUILT
2. Go to 720-01-02
3. Replace the digit with a "0" as shown here
xx0x-xxxx
DISABLE KEY-IN IGNITON CHIME
1. IPC AS BUILT
2. Go to 720-01-02
3. Replace the digit with a "2" as shown here
xxxx-x2xx
Are you sure the reason you can’t pick instantaneous fuel is because of this seatbelt mod? Can you uncheck distance to empty and then check instantaneous fuel? You are limited to only checking 4 OPTIONS to display in the trip menu!Well, it worked but I seem to have lost a feature. Instant MPG is now not available. I've tried everything possible to get it back but it appears to be permanently disabled. I'll have to revert back to defaults I guess.
Worked great here also on a '23 Hybrid XL w/ CP360. Thanks @EONR24 !
@EONR24, first of all, thank you for posting this spreadsheet. I found the full spreadsheet, but where can I find the key to these items in this spreadsheet? I can't figure out what some of the acronyms mean, and I can't find the right search term for google's help. Some are very clear, some can be guessed at, and some are just gibberish for me, anyway. For example, what does LDWOFFTT stand for (720-02-01), RBMFES (720-02-02), "telltale" (lots of entries, including in easy mode), or any of 30 or 40 other terms. Any hint as to where I might find these terms spelled out in plain or nearly plain English? Thanks.If you would like to keep the Minder (the dash light and chime) and not the Monitor (the seatbelt screen) I would suggest doing the following coding based on this diagram and my original coding in my Maverick.
720-13-01 9100 0001 8000
720-13-02 0110 1000
720-14-01 1000 0000 0000
720-14-02 All Zeros
