Unlocking More Hidden Features for 4 inch Cluster using FORScan

[EONR24]

I saw on your first pic a cutoff of the DRL’s. Are there lines for the LF and RF DRL? That’s what I’m trying to change.

Sorry for the late reply. Here you go. I would consider comparing your entire BCM coding with the BCM coding from a Lariat to ensure you are changing the right settings. These are th epics you looking for i think

Sponsored

 

[24atlasmaverick]

Sorry for the late reply. Here you go. I would consider comparing your entire BCM coding with the BCM coding from a Lariat to ensure you are changing the right settings. These are th epics you looking for i think

Yes perfect thank you! And yes I plan on referencing a lariat BCM coding. Just need a baseline haha. Thanks!

looking through these seems like these are available in the “easy mode” but I am not sure where to go to get this module to communicate over the Lin line. I guess I keep trying!

thanks for all your help!

 

[EONR24]

Yes perfect thank you! And yes I plan on referencing a lariat BCM coding. Just need a baseline haha. Thanks!

looking through these seems like these are available in the “easy mode” but I am not sure where to go to get this module to communicate over the Lin line. I guess I keep trying!

thanks for all your help!

Keep trying and reference this!!

Hope you get it figured out. Love the lariat headlights and taillights!

 

[EONR24]

Yes perfect thank you! And yes I plan on referencing a lariat BCM coding. Just need a baseline haha. Thanks!

looking through these seems like these are available in the “easy mode” but I am not sure where to go to get this module to communicate over the Lin line. I guess I keep trying!

thanks for all your help!

Hope you get it figured out. Love the lariat headlights and taillights! reference THIS spreadsheet

 

[thev8man]

Hey everyone!

So I have just been digging through this Maverick Hex Code Spreadsheet (mostly the IPC section) and I found a few more useful coding changes for the 4 inch Cluster in addition to my ORIGINAL THREAD. I will list the coding and pictures below.

ENABLE OR DISABLE PHONE, AUDIO AND NAV SCREEN
1. OPEN IPC AS BUILT
2. Go to 720-17-01
3. Change the seventh digit based on this guide below

DISABLE ALL "0" xxxx-xx0x-xxxx
ENABLE ALL "F" xxxx-xxFx-xxxx

(Factory Coding Below)
PHONE AND AUDIO ENABLED, NAV DISABLED "C" xxxx-xxCx-xxxx

I THINK NAV SCREEN ONLY WORKS WITH SYNC WHICH IS LARIAT ONLY. IT CURRENTLY SHOWS A COMPASS BECAUSE I DONT HAVE SYNC


ENABLE TRIP/AUDIO MY VIEW SCREEN
1. OPEN IPC AS BUILT
2. Go to 720-17-01
3. Change the eighth digit to a "8" as shown below. (Factory coding is a "9")

xxxx-xxx8-xxxx


CHANGE YOUR DEFAULT MYVIEW SCREEN
1. OPEN IPC AS BUILT
2. Go to 720-17-02
3. Change the second digit based on the guide below

(Factory Coding) Digital SPEEDO "0" x0xx-xxxx
FUEL ECONOMY "1" x1xx-xxxx
TRIP/AUDIO "2" x2xx-xxxx
CALM SCREEN "3" x3xx-xxxx
ECO COACH "4" x4xx-xxxx
FORD PERFORMANCE "5" x5xx-xxxx


UPDATE: JUST FOUND A NEW CODING TO TRY TO ENABLE TURN BY TURN DIRECTIONS IN THE CLUSTER

Booyah
That's awesome

 

[TedTX]

Avoid russian based toolsets

 

[EONR24]

Avoid russian based toolsets

Is that Gibberish? Russian based toolsets? You mean Forscan? Are you another troll like that Mike guy?

 

[EONR24]

Avoid russian based toolsets

Ted bored on a Thursday makes pointless comments that help no one on multiple threads

 

[Gullzway]

I'll play around with some more coding to see if I can enable that! Thanks for the INFO.

Are you talking about on the instrument cluster?
I got that working a while back on my Lariat, but don't remember the steps now.

Edit; https://www.mavericktruckclub.com/f...ion-on-the-6-5-dash-display.35362/post-640481

 

[DTF-Garage]

So I did a little research on this for the Ford Performance Screen.

The Fiesta & Focus ST 2018+ came with the 4" screen, then in 2022 the ST's came with the full 12.3" cluster (2021 for the Puma ST). So it actually makes sense that there is the option for a "Ford Performance" screen on the small cluster and most likely the 12.3" cluster, but none available for the mid-tier 7" screen cluster, because (unfortunately) it was never offered with any of Ford's ST offerings. I guess us 7" guys will just have to keep dreaming unless someone comes up with something custom.

 

[EONR24]

So I did a little research on this for the Ford Performance Screen.

The Fiesta & Focus ST 2018+ came with the 4" screen, then in 2022 the ST's came with the full 12.3" cluster (2021 for the Puma ST). So it actually makes sense that there is the option for a "Ford Performance" screen on the small cluster and most likely the 12.3" cluster, but none available for the mid-tier 7" screen cluster, because (unfortunately) it was never offered with any of Ford's ST offerings. I guess us 7" guys will just have to keep dreaming unless someone comes up with something custom.

It would be SWEET if someone could get the ford performance screen working on a 12 inch cluster on the Maverick!

 

[DTF-Garage]

It would be SWEET if someone could get the ford performance screen working on a 12 inch cluster on the Maverick!

I agree, I'm not sure if the ST Explorer actuallly comes with an ST Splash Screen with the 12" Cluster, but I assume it would. If it does I'm sure someone could figure out how to get it programmed with the Maverick.

I guess we'll have to see what gauges the 2025 Maverick ST comes with!

Sponsored