Truck Box Divider

[Doc.396]

I am looking for a source for a Truck box divider for my 2026 Maverick. The only one I can find so far is from Ford but it requires you have some box divder ranck device. All I want is a light weight divider that will slide in to the existing slots in the truck box.

Thanks Doc

Sponsored

 

[Hot Runr Guy]

I am looking for a source for a Truck box divider for my 2026 Maverick. The only one I can find so far is from Ford but it requires you have some box divder ranck device. All I want is a light weight divider that will slide in to the existing slots in the truck box.

Thanks Doc

Make your own. My current one is made from a 5-1/2" Cedar fence picket. Lightweight, and does the job.

HRG

 

[Khrome83]

While not a divider, I went with a taco net, after I realized groceries were really my issue.

 

[BK007]

Harbor Freight cargo bar.

 

[Glen Baker LLC]

Wood seems to be the common DIY material. All depends on your skill and price point.

 

[MavStangVa]

Mabett offers 1 that uses the factory rails on the Lariat.
https://www.mavericktruckclub.com/f...d-for-—-v2-bed-divider-is-finally-here.76682/

 

[rclee]

Wood seems to be the common DIY material. All depends on your skill and price point.

@Glen Baker LLC , I modified my divider even more. Mine is the last pic you posted (Area 51 Mav)
I lightened it by cutting holes in it, and I rounded the corners to make it slide in the slots easier. I have the Spray in liner and it gets wegded in pretty with the straight corners.

One hand operation now!

 

[Hamerhead]

I used a scrap piece of 5/4 deck board for mine but after seeing some of these I need to up my game!

 

[Hot Runr Guy]

I used a scrap piece of 5/4 deck board for mine but after seeing some of these I need to up my game!

Here's some inspiration for you!

https://www.mavericktruckclub.com/forum/threads/truck-bed-divider-art.39687/

HRG

 

[rick52]

Whatever you make, remember to make the height of the board to coincide with the height of the tailgate in the middle position.

 

[BigClydeLittleTruck]

A 2x4, a few wood screws, some leftover grill paint, and 3 milk crates make for great grocery organization!

My idea here was to prevent the crates from moving by wedging them against the tailgate and be able to make less trips in and out of the house.

 

[darrenbellouny]

I have been using this since my 2021 Ranger. Fit the ranger with swing case then fit the Santa Cruz and now my Maverick.

https://a.co/d/09xx4awI

Sponsored