Tailgate stops when up

[Wilyspike]

Anyone have a like to get the clips that hold the stops in place?

Sponsored

 

[XL Hybrid Cactus Gray]

Anyone have a like to get the clips that hold the stops in place?

 

[Glen Baker LLC]

Doug,
I think I understand what you're looking for.
Let me reword your post and attempt to give you an answer

Anyone have a like (LINK) to get the clips that hold the stops in place?

I'm going to go out limb and say, I think this is what you're asking about.

A picture of what you're referring to would help.
I found this thread using the search feature.
https://www.mavericktruckclub.com/forum/threads/tailgate-rubber-stop-bumper-question.39775/

Without a picture I don't know if this is exactly what you're looking for but I found these on eBay.

 

[icegradner]

Anyone have a like to get the clips that hold the stops in place?

Are you asking about the plastic rivets that hold the rubber bumper stops for the tailgate?

If so those are Part # NZ6Z-99439A00-A and NZ6Z-99439A00-B. One is the right side, one is the left. They come with the bumpers, not separately.

 

[MaverickDragon]

Anyone have a like to get the clips that hold the stops in place?

Maybe, if I needed them, but doesn't every Maverick already have them to hold the stops?
Are you asking where you can get them because you don't have them?
If they are not (apparently) an available separate item, perhaps a pick-a-part?

 

[MakinDoForNow]

Anyone have a like to get the clips that hold the stops in place?

Looks like the clips come attached to the bumper and just push into the hole to get the other side bumper change the "-B" to "-A". You may have to needle nose old broken off clip out of hole or push it through to clear the hole it snaps into.
https://www.google.com/search?q=how...3&sourceid=chrome-mobile&ie=UTF-8#lfId=ChxjMe

 

[VICKY]

ha ha ha ha ha ha ha ha

 

[BoxxerDad@50]

ha ha ha ha ha ha ha ha

This Meme is priceless for the question!!

 

[KEMeyer]

Anyone have a like to get the clips that hold the stops in place?

Please clarify.

 

[stevj]

Anyone have a like to get the clips that hold the stops in place?

A poorly defined problem holds an infinity of solutions.

Steve

 

[FHFR3Maverick]

I've been down this road and they are only available with the bumpers, about $20. I'm still looking to see if any other push clips will work but no luck so far.

 

[MakinDoForNow]

I've been down this road and they are only available with the bumpers, about $20. I'm still looking to see if any other push clips will work but no luck so far.

Double sticky tape???

 

[HeyBales]

Double sticky tape???

My mom would attempt that, maybe velcro first for some reason.

 

[Glen Baker LLC]

Double sticky tape???

My mom would attempt that, maybe velcro first for some reason.

J-B Weld for a permanent install.

How about a combination of a simple Drywall Toggle Bolt to hold the bumper in place until the JB Weld dries?

 

[rclee]

I actually used the 3m doublesided tape (the rubber kind) and have not thought about it for a couple of years.

Sponsored