Maxzina-Maverick Visor Rain Guards Demand

[Maxzina]

I would be interested had I not installed the EGRs a few months ago. I like the slimmer bottom by the mirror and the fact that the front visors have two sided tape to hold them in place. My front EGR visors don't have tape and the back of the visor comes down out of the channel when I roll down the window. I can push it back up in the channel rather easily, but it needs tape to hold it. Unfortunately, that will have to wait until Spring as it 15°F out and the tape won't stick.

Yeah.Considering the cold weather, the tape may not stick properly, we have also prepared an adhesive aid for everyone. If there is a need for strong bonding, it can be used.

Sponsored

 

[Maxzina]

Those look great, almost identical to the EGR in channels. The width of the lower front visors do obstruct the outside rearview mirrors.

Great photos!

 

[Don806]

I'd think there would be high-demand for in-channel visors.
I'd order if you don't include a logo like EGR did, that's why I didn't order EGR.
And I was going to hold out for weathetech, but they don't have rear visors yet.

I have the EGR and one of the logo stickers fell off and was in the box, the others came off easily. My gripe with them is the mirror blockage

I planned to pull them off, see if I can trim them a little with a Dremel without ruining them

Wondering if they can be removed and reinstalled?

 

[Skulls Road]

I'm down.

 

[EffNo50]

They probably had to trim down the front by the mirror because they look solid, in other words non-transparent.

The 4th picture looks like it shows they are not solid.

 

[Random]

My EGR, purchased two months ago, have laser etched logo. It annoys me but I’m not going to replace them.

I don’t see a need for tape though as they don’t move. That being said I would have chosen these if they were available when I was looking.

 

[Toddman45]

I planned to pull them off, see if I can trim them a little with a Dremel without ruining them

Wondering if they can be removed and reinstalled?

The EGRs don't use any tape they just fit very snugly in the front window channel. So yes if you wanted to you could remove them for trimming.

I'd recommend using masking tape and they dremel.

 

[Toddman45]

My EGR, purchased two months ago, have laser etched logo. It annoys me but I’m not going to replace them.

I don’t see a need for tape though as they don’t move. That being said I would have chosen these if they were available when I was looking.

Same here the logo on my EGRs are laser etched, I ran my fingernail over it it's definitely no sticker.

 

[KathyG]

I have the EGR and one of the logo stickers fell off and was in the box, the others came off easily. My gripe with them is the mirror blockage

I planned to pull them off, see if I can trim them a little with a Dremel without ruining them

Wondering if they can be removed and reinstalled?

I'm short and have driver's seat up pretty far - and the only view rhat is affected by EGR vent visors is my view down the passenger side of the Maverick's body. Not a problem in traffic or parallel parking for me as I can see through the smoke gray plastic....

 

[LincolnSixEcho]

Im interested. Whats the estimated price and when can we buy them?

 

[Maxzina]

Im interested. Whats the estimated price and when can we buy them?

Maybe $79.99.And will have 20% discounts for MTC members.The page will have 5% discounts.There will also be discounts on other accessories together. The specific price will be discounted to everyone after the goods arrive.

 

[CarbonGrayFX4]

I would be very interested in these. I recently installed the EGR in channel, smoked visors and they have a very BROWN hue to them. I like the fit and function but I hate the brown tint. If I backlight them with an led flashlight they look brown instead of gray/blue like AVS dark smoke. Do you have an ETA? Are you able to post pictures of the visors backlit or in direct sunlight? Thanks!

 

[hdave]

Maybe $79.99.And will have 20% discounts for MTC members.The page will have 5% discounts.There will also be discounts on other accessories together. The specific price will be discounted to everyone after the goods arrive.

ETA on these?

 

[Maxzina]

I would be very interested in these. I recently installed the EGR in channel, smoked visors and they have a very BROWN hue to them. I like the fit and function but I hate the brown tint. If I backlight them with an led flashlight they look brown instead of gray/blue like AVS dark smoke. Do you have an ETA? Are you able to post pictures of the visors backlit or in direct sunlight? Thanks!

Around Mid Jan.We are currently taking relevant photos. If our pictures are updated, we will include them in the post.

 

[Maxzina]

ETA on these?

Around Mid Jan.

Sponsored