Maverick Hybrid Build: HRG 1.5" lift, 17" RRW Wheels, Toyo Open Country AT3, Steeda strut tower brace, PPF & more

[Majoretx]

Not sure, I never take my vehicles through a car wash, so I didn’t ask. I always hand wash or pay someone to hand wash.

Looks like I need to stop being lazy lol

Sponsored

 

[TRUCKHEF]

i squished in 245/75/17 on mine and it baaaaaarely scrapes on the felt liner in the front on a full lock turn, if i did it a second time i think i may do 65 profile, but i also have a level kit to install and i feel once i do that it will stop the rubbing.

 

[PA-Homesteader]

- HRG 1.5” lift
- RRW 17x8 wheels (RR5-V)
- 245/65/17 Toyo Open Country AT3
- McGard lug nuts
- Steeda strut tower brace
- F150 LEDs all over
- Ceramic tint
- PPF the entire front, front fenders, hood, A pillars, edge of roof, etc
- Ceramic coated the paint
- Tailgate strut install
- LCD protector
- Center console organizer
- Waiting on mini antenna

Would like to get white Lariet door handles. Would like airbags and a tonneau cover. Probably missing some things.

Which wheels did you order?

I see there is 5 different choices

 

[azmotoxxx]

i squished in 245/75/17 on mine and it baaaaaarely scrapes on the felt liner in the front on a full lock turn, if i did it a second time i think i may do 65 profile, but i also have a level kit to install and i feel once i do that it will stop the rubbing.

Please keep me posted on if it rubs after you install lift. Wish I could have gone with a little bigger tires, but can’t stand when it rubs at all. When you drive in the dirt chances of it rubbing go up as well from dirt and rocks sticking to your tires a bit.

 

[azmotoxxx]

Which wheels did you order?

I see there is 5 different choices

I did these with black bolts.

 

[azmotoxxx]

They are the gun metal color

 

[azmotoxxx]

Looks like I need to stop being lazy lol

Nah, it’s not fun to do, so you definitely aren’t lazy. I’ll pay more often than not to get the truck hand washed especially when I’m busy.

 

[GSTRIDR]

I installed the lift kit with my buddy and then after we finished, I took it in to get an alignment. They adjusted the toe I think and said the rest really wasn’t off at all. It’s 35” from the ground to where the fender starts. It’s 35” on the front and the rear. It’s spot on level. No I’ll effects, it rides nice and the kit is high quality.

Sorry, I didn’t type my question very well. Does the kit include spacers for the rear? That is, it’s not JUST lifting the front suspension, but also the rear? Thanks!

 

[azmotoxxx]

Sorry, I didn’t type my question very well. Does the kit include spacers for the rear? That is, it’s not JUST lifting the front suspension, but also the rear? Thanks!

My bad, I misunderstood. No, it is just a 1.5” spacer lift, but check this out.

 

[PA-Homesteader]

I did these with black bolts.

Thanks!

 

[Tyler Richter]

I just ordered the HRG kit for my Hybrid XLT. How have you been liking it so far? Do you notice any difference in ride quality? How do you like the Open country tires, I am in the market for tires next and I want an A/T tire but keeping road noise down is a priority.

 

[DangerZone]

- HRG 1.5” lift
- RRW 17x8 wheels (RR5-V)
- 245/65/17 Toyo Open Country AT3
- McGard lug nuts
- Steeda strut tower brace
- F150 LEDs all over
- Ceramic tint
- PPF the entire front, front fenders, hood, A pillars, edge of roof, etc
- Ceramic coated the paint
- Tailgate strut install
- LCD protector
- Center console organizer

Updated stuff:
- BuildRight Industries Mini antenna
- Hood struts
- Custom stereo system
- Rock Fosgate - 6 speakers & amp
- JL Audio 10” subwoofer
- sound deadening material in all four doors, under and behind rear seat
- Auto-dimming home link rear view mirror
- AkroHD trash can
- AkroHD cup holder coasters
- AkroHD phone holder in cubby

Next up:
- painted Ford logos front, side and rear

Would like to get white Lariet door handles. Would like airbags and a tonneau cover down the road possibly.

Could you update on the process of painting the logos. I have an Oxford White Mav and want to paint the side XLT badges.

 

[azmotoxxx]

I just ordered the HRG kit for my Hybrid XLT. How have you been liking it so far? Do you notice any difference in ride quality? How do you like the Open country tires, I am in the market for tires next and I want an A/T tire but keeping road noise down is a priority.

Love it, the lift and tires are great. The road noise isn’t bad at all. It’s just a tad bit rougher/stiffer and louder mostly at highway speeds. I think you will be stoked. Do it

 

[azmotoxxx]

Could you update on the process of painting the logos. I have an Oxford White Mav and want to paint the side XLT badges.

I didn’t pull the trigger yet, but this guy can help you. I’ll probably use him soon. https://instagram.com/bfntruckshop?igshid=YmMyMTA2M2Y=

 

[NewcMaverick]

This sold me on the Toyo tires. Look like a good deal and with some rugged rims looks decent. Thanks for posting.

Sponsored