Ford Maverick

[mylittleMAV]

bought

View attachment 204893

View attachment 204894

Sponsored

 

[AMTRV]

Lemon law!
or stop whining……bad habit to get into

 

[mylittleMAV]

Nothing to do with whining, made to fit or it isn’t.
i wouldn’t hire a contractor that thinks, well it’s a little off, but it’s close.

close counts in horseshoes, handgranades, etc.

 

[Hot Runr Guy]

Per the instructions, should be centered with a gap on both ends.

HRG

 

[mylittleMAV]

Didn’t get that instruction set with it, but I set it on before taking the tape off and could see that it wasn’t a perfect fit.
the problem was that once I removed the tape seal and set it near the edge it didn’t want to move. Stuck down like glue and I was afraid to pry it back up. I guess I could try that.
it just seems like it would be nice if it was a little longer and covered the hood all the way.

 

[Lbizzle8]

What do you guys think about this. I bought this on the ford site and look at how it fits on the Maverick.
Supposed to be made for it. Do you think if I complain to ford they would do anything?
Just needs to be a little longer. Fits perfectly except the length.
Maybe I’m just picky??

View attachment 204893

View attachment 204894

Same as mine lol but it’s wtv doesn’t bother me.

 

[Achtungg]

What do you guys think about this. I bought this on the ford site and look at how it fits on the Maverick.
Supposed to be made for it. Do you think if I complain to ford they would do anything?
Just needs to be a little longer. Fits perfectly except the length.
Maybe I’m just picky??

View attachment 204893

View attachment 204894

I had no problem with the fit and finish of mine. And I just eyeballed it lol

 

[mylittleMAV]

Same as mine lol but it’s wtv doesn’t bother me.

Thanks! I think you are right, you only look at one side at a time anyway! The good side is the driver side!

 

[oysterville]

Weird, for some reason I thought that I was going to be looking at the bad fit of a Maverick hood.

 

[SuperK401]

Weird, for some reason I thought that I was going to be looking at the bad fit of a Maverick hood.

Always measure twice and cut once.

 

[Joe Strummer]

So you install it incorrectly (off centre) and then want to blame/complain to Ford. Good luck with that. I have the same Hood Protector and it fits just fine.

 

[Glen Baker LLC]

Didn’t get that instruction set with it, but I set it on before taking the tape off and could see that it wasn’t a perfect fit.
the problem was that once I removed the tape seal and set it near the edge it didn’t want to move. Stuck down like glue and I was afraid to pry it back up. I guess I could try that.
it just seems like it would be nice if it was a little longer and covered the hood all the way.

Do you have a copy you can post of the instructions you did get?

 

[MakinDoForNow]

Weird, for some reason I thought that I was going to be looking at the bad fit of a Maverick hood.

Me too. I was expecting something that looked maybe like buck teeth!

 

[mylittleMAV]

Do you have a copy you can post of the instructions you did get?

Didn’t come with any.

Sponsored