Factory OEM FORD part numbers for Maverick bed D-Rings and rear side tie hooks for XL (with installed pics)

[Jlaw]

What size and length are the bolts for those bed floor rings? At that price I'd rather install some third party D-rings instead. @flyvertigo @Jlaw

The threads are m8x1.25, I'm not sure of the length off the top of my head, but I'd guess 250mm. The rings are the expensive part though.

Sponsored

 

[flyvertigo]

What size and length are the bolts for those bed floor rings? At that price I'd rather install some third party D-rings instead. @flyvertigo @Jlaw

Thread length is 1 inch.

 

[PortlandME]

I'm confused... are dealers actually charging $40-$50 PER D-Ring??? That can't be right? Has anyone found a non-OEM D-Ring with proper bolt spacing?

 

[g1zstar]

I'm confused... are dealers actually charging $40-$50 PER D-Ring??? That can't be right? Has anyone found a non-OEM D-Ring with proper bolt spacing?

Well I wouldn't say there charging that amount because it seems like they're not even fulfilling these orders . Other guy hasn't reported any update so I assume his order still hasn't been delivered.

I ordered Feb 10 and still nothing, just stuck on processing.

Welp Feb 10 -> Mar 27. Sent an email to please cancel my order cause goddamn that's ridiculous.

 

[eRay]

Does anyone know if the holes for the top rear D rings are actually threaded? My Area 51 XL either is not threaded or has very thick paint.

 

[flyvertigo]

Does anyone know if the holes for the top rear D rings are actually threaded? My Area 51 XL either is not threaded or has very thick paint.

I just looked at mine. No threads. I will have to look in my toolbox for a tap.

 

[eRay]

Story of my life. I got the D ring brackets and screws and now have no threads. LOL

 

[flyvertigo]

Story of my life. I got the D ring brackets and screws and now have no threads. LOL

You don't live too far away. I'll Be up there in a couple of days with my tap.

 

[ttheroux]

Since I purchased an XL Maverick my truck did not come with all of the D-Ring and side tie down points that the XLT and Lariat have. I added them to my truck today. Not sure if they have been posted here yet but for anyone wanting to add these to their XL truck Maverick, here are the part numbers.

D-Ring Front Floor NZ6Z 60550A74-A
D-Ring Bolts Floor W721941-S450B

Rear Tie down D ring side 5176389-YL3Z-9900064-AAA
Rear D ring side bolts W718208 S450B

View attachment 21809

Very helpful post! My parts guy had trouble looking them up so I gave them to him. Thanks!

 

[ttheroux]

I ordered all these parts from my dealer with the exception of the bed floor d-rings. They wanted $59 each for what should be an $8 part.

 

[KimDP]

The threads are m8x1.25, I'm not sure of the length off the top of my head, but I'd guess 250mm. The rings are the expensive part though.

Do the

 

[Stive]

Does anyone know if the holes for the top rear D rings are actually threaded? My Area 51 XL either is not threaded or has very thick paint.

I just discovered the same thing. I watched a video and someone else on this forum had amazon parts so that is what I ordered. However, no threads in the bed. I’ll be looking for a friend with a die now.

 

[LJB]

Here is an alternative solution. This maybe a bit more expensive, but the tie down systems in aircraft may a very good alternative. The tracks are 7075 aluminum and the tie down rings are plated. https://ancraaircraft.com/cargo-fittings-nets-straps/

 

[MaverickResource]

I actually just installed some cheaper aftermarket alternatives.

You can get D-Ring anchors that work with the pre-existing holes for $2.51/each currently. See below.

Keeper D-Ring Anchors: https://amzn.to/3jOgC0w



Optional tools and bolts if you don't have them already (below):

Bolts M8 1.25 x 25mm Flange Hex Bolts: https://amzn.to/3Xk5fLF
T-Handle Tap Wrench to wrench the tap: https://amzn.to/3wXTijW
M8-1.25 Tap: https://amzn.to/3jUd0Ks
Cutting/Tapping Oil: https://amzn.to/3xjQQo0

 

[MaverickResource]

Watch here:

Sponsored