2024 underbody splash shield - any non-OEM?

[mshapeer]

Driving north on highway 1 in Delaware, hit debris that ripped up the underbody splash shield - NZ6B-9D183-AB. Removed the shield and applied liberal amounts of duct tape. Looking to replace it.

Does anyone have a source for non-OEM replacements? All I have found are listings for Ford dealerships and used parts on ebay.

Thank you

Sponsored

 

[BK007]

Check them out not sure if they have all you need but they do offer some. https://www.rival4x4usa.com/
@RIVAL 4x4

 

[mshapeer]

Check them out not sure if they have all you need but they do offer some. https://www.rival4x4usa.com/
@RIVAL 4x4

Looking for the fabric underbody shield that covers the area behind the skid plate.
Not looking for the engine shield or for metal cover.

Looking for replacement for OEM NZ6B-9D183-AB.

Does anyone have a source for non-OEM replacements? All I have found are listings for Ford dealerships and used parts on ebay.

Thank you

 

[Aleks]

i installed the rival 4x4 skid plate for specifically that reason you experienced... something kicks up and wreaks havoc on the underside.

It's pricey but it's solid and the install wasn't too bad.

quick look on amazon there's something like this that you could probably make work if you. have a little bit of diy ability in ya.

https://amzn.to/4aZvReB

 

[BK007]

Looking for the underbody shield that covers the area behind the skid plate.

https://www.jcroffroad.com/category/MAVERICK.html

 

[BK007]

 

[BK007]

Looking for the fabric underbody shield that covers the area behind the skid plate.
Not looking for the engine shield or for metal cover.

Looking for replacement for OEM NZ6B-9D183-AB.

Does anyone have a source for non-OEM replacements? All I have found are listings for Ford dealerships and used parts on ebay.

Thank you

These are the only non OEM ones that I know of that make underbody armor. Don't think they have what your looking for. https://www.jcroffroad.com/ https://www.rival4x4usa.com

 

[mshapeer]

These are the only non OEM ones that I know of that make underbody armor. Don't think they have what your looking for. https://www.jcroffroad.com/ https://www.rival4x4usa.com

Correct - just want to replace the original with similar shield. Checking with the dealer tomorrow to see price. ebay used are $120 and up - trying to find cheaper.

Thanks

 

[Hot Runr Guy]

Does anyone have a source for non-OEM replacements? All I have found are listings for Ford dealerships and used parts on ebay.

What makes you think an aftermarket supplier will spend the money to create tooling to make a product they'd sell 10's of?

HRG

 

[mshapeer]

What makes you think an aftermarket supplier will spend the money to create tooling to make a product they'd sell 10's of?

HRG
[/QUOTE

What makes you think an aftermarket supplier will spend the money to create tooling to make a product they'd sell 10's of?

HRG

There are a lot of after-market parts for Mavericks including the engine shield.
Not sure why asking if anyone knows of the part is an issue - there is a lot of knowledge of the board. Thanks for your contribution

 

[Carlitos_92]

Looking for the fabric underbody shield that covers the area behind the skid plate.
Not looking for the engine shield or for metal cover.

Looking for replacement for OEM NZ6B-9D183-AB.

Does anyone have a source for non-OEM replacements? All I have found are listings for Ford dealerships and used parts on ebay.

Thank you

If you can't find it on eBay or Amazon, it likely doesn't exist. Most people either pony up for an OEM version at the cheapest Ford dealer they can find, or just run without it.

 

[mshapeer]

If you can't find it on eBay or Amazon, it likely doesn't exist. Most people either pony up for an OEM version at the cheapest Ford dealer they can find, or just run without it.

I think you are right - probably just have to bite the bullet and pay the price. Thanks

 

[betlouboo]

Driving north on highway 1 in Delaware, hit debris that ripped up the underbody splash shield - NZ6B-9D183-AB. Removed the shield and applied liberal amounts of duct tape. Looking to replace it.

Does anyone have a source for non-OEM replacements? All I have found are listings for Ford dealerships and used parts on ebay.

Thank you

Im on a wait list

 

[ejouie]

This is what I have on my list.

https://a.co/d/00Su9wyJ

 

[Glen Baker LLC]

This is what I have on my list.

https://a.co/d/00Su9wyJ

Interesting
I wonder if those panels open up in the right location for an oil change.
I would definitely consider it if I had an EcoBoost.

Sponsored