Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

[airmanadams88]

Any idea how to overcome this issue? Apim if from a 2024 escape and I have a lariat so had factory nav with sync 3. Would like factory nav to work on sync 4 but seems like it’s all grayed out. It’s following me around on map but I can’t plug any addresses in to navigate to.

Sponsored

 

[Billzilla15]

Any idea how to overcome this issue? Apim if from a 2024 escape and I have a lariat so had factory nav with sync 3. Would like factory nav to work on sync 4 but seems like it’s all grayed out. It’s following me around on map but I can’t plug any addresses in to navigate to.

Nav is subscription based. So your gonna need to pay. But I'm not sure how that would work

You can continue to view the map or use Android or car play

 

[airmanadams88]

Nav is subscription based. So your gonna need to pay. But I'm not sure how that would work

You can continue to view the map or use Android or car play

Knew it was subscription based for live traffic, weather etc. was hoping I could still just use basic navigation as others have been able too with escape apims in lariat trims

 

[Dave O]

Post #338 just saying

 

[Bobert47]

I've been considering trying module updates with FDRS (specifically for the sync4 APIM)...anyone have any experience doing that or can point to some step by steps? I read on Cyanlab that there may be a roadblock in getting this to work since the retrofitted module came from a vehicle with different VIN so will result in a congruency issue between vehicle and ford servers, while also not allowing the update...thoughts?

 

[Bobert47]

Knew it was subscription based for live traffic, weather etc. was hoping I could still just use basic navigation as others have been able too with escape apims in lariat trims

I'm also interested if anyone has insight into this. I still have basic nav routing working on sync4 APIM, and it was just working that way when installed and matched to sync3 settings.

 

[breeves002]

I've been considering trying module updates with FDRS (specifically for the sync4 APIM)...anyone have any experience doing that or can point to some step by steps? I read on Cyanlab that there may be a roadblock in getting this to work since the retrofitted module came from a vehicle with different VIN so will result in a congruency issue between vehicle and ford servers, while also not allowing the update...thoughts?

It won't let you do it. It will not show an available update for that VIN.

 

[breeves002]

Harnesses are finally in and 1 more revision to the bracket and I'm hoping to have them shipping by the end of this week! Harness works with both upgrades to 8" sync 4, 12" sync 4, and the 13.2" escape screen. Bracket is only for the 12" transit screen.

 

[Bobert47]

It won't let you do it. It will not show an available update for that VIN.

That's what I was afraid of....oh well. Any experience with FDRS updating stock setup?

 

[Billzilla15]

Harnesses are finally in and 1 more revision to the bracket and I'm hoping to have them shipping by the end of this week! Harness works with both upgrades to 8" sync 4, 12" sync 4, and the 13.2" escape screen. Bracket is only for the 12" transit screen.

This is some good stuff. Almost makes me wish I still had my maverick

 

[Toddman45]

Harnesses are finally in and 1 more revision to the bracket and I'm hoping to have them shipping by the end of this week! Harness works with both upgrades to 8" sync 4, 12" sync 4, and the 13.2" escape screen. Bracket is only for the 12" transit screen.

So Sam you're saying you're going to have harnesses available for sale that will work with this upgrade for the XLT??? Or is this Lariat it only?

 

[breeves002]

So Sam you're saying you're going to have harnesses available for sale that will work with this upgrade for the XLT??? Or is this Lariat it only?

Yes XL and XLT. They are available now! I also have one that works for the Lariat.

The harness for the XL/XLT: https://oemplusupgrades.com/products/2022-2024-maverick-sync-4-upgrade-harness

Code "mavericktruckclub" for $50 off.

 

[Bwillie]

Harnesses are finally in and 1 more revision to the bracket and I'm hoping to have them shipping by the end of this week! Harness works with both upgrades to 8" sync 4, 12" sync 4, and the 13.2" escape screen. Bracket is only for the 12" transit screen.

Just ordered the complete kit from you! I've been waiting for an easy plug and play option! Thank you and can't wait for the upgrade!

 

[Toddman45]

Yes XL and XLT. They are available now! I also have one that works for the Lariat.

The harness for the XL/XLT: https://oemplusupgrades.com/products/2022-2024-maverick-sync-4-upgrade-harness

Code "mavericktruckclub" for $50 off.

Any forum discounts for the whole kit for the XLT?

 

[Toddman45]

My biggest problem I have with the upgrade kit is that you don't get the OEM navigation which I don't really care about but for the price it should be included as well as you still don't get serious XM capabilities other than streaming.

For the $1,500 charge it should include a Sirius XM tuner as well that functions. Seems like a lot of money for little added features in my opinion.

Sponsored