Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

[MattinNC]

Anyone do this swap in a Lariet hybrid without the B&O system and got the Ford Pass app working? I've got everything else working like I expect but I can't seem to find the correct settings in Forscan to get the app to connect.

Sponsored

 

[MattinNC]

Success! I believe I have everything working now as it should. I did have to reconnect the ACM to get the Ford Pass to connect. I'm going to share a few things I did differently for my install but of course the information on this and other threads have done all the heavy lifting.

An interesting screen @Bobert47 posted, I'd like to know how you access this screen? It looks like it in Apps. Maybe connected services, which I don't appear to have.

 

[breeves002]

Success! I believe I have everything working now as it should. I did have to reconnect the ACM to get the Ford Pass to connect. I'm going to share a few things I did differently for my install but of course the information on this and other threads have done all the heavy lifting.

An interesting screen @Bobert47 posted, I'd like to know how you access this screen? It looks like it in Apps. Maybe connected services, which I don't appear to have.

Someone sent me this today and I decided to do a deep dive here and figure it out.

Make sure hybrid is enabled:
7D0-02-02 xx8x xxxx xxxx

Enable the power flow menu:
7D0-02-02 xxx6 xxxx xxxx WITH climate bar enabled
7D0-02-02 xxx4 xxxx xxxx WITHOUT climate bar enabled (what you have pictured).
I don't have access to a hybrid so I can't actually confirm this works but I'm pretty sure it will. Report back with your findings!

If you just want to enable the climate bar layout:
Enable unreal theme:
7D0-02-03 xxxx xxx1 xxxx
Enable Climate bar for non-hybrid:
7D0-02-02 xxx2 xxxx xxxx

If things look weird or don't show up reboot the apim by holding power and next track for 10s or reprogram nothing into it, or reboot with FORScan.

As always any parts or programming you need for these upgrades check out www.oemplusupgrades.com!

 

[Bobert47]

Someone sent me this today and I decided to do a deep dive here and figure it out.

Make sure hybrid is enabled:
7D0-02-02 xx8x xxxx xxxx

Enable the power flow menu:
7D0-02-02 xxx6 xxxx xxxx WITH climate bar enabled
7D0-02-02 xxx4 xxxx xxxx WITHOUT climate bar enabled (what you have pictured).
I don't have access to a hybrid so I can't actually confirm this works but I'm pretty sure it will. Report back with your findings!

If you just want to enable the climate bar layout:
Enable unreal theme:
7D0-02-03 xxxx xxx1 xxxx
Enable Climate bar for non-hybrid:
7D0-02-02 xxx2 xxxx xxxx

If things look weird or don't show up reboot the apim by holding power and next track for 10s or reprogram nothing into it, or reboot with FORScan.

As always any parts or programming you need for these upgrades check out www.oemplusupgrades.com!

Thanks for addressing this! I took that picture just after getting my build setup. I can confirm that those lines are what I needed to get the screen working. I will add that the "trip" screens that will show up on the this mod (if enabled) don't synchronize with the the "trip" on the cluster. I learned this from another user on here, and that you would need to swap out your cluster for a 2023 escape (or similar from what I recall). Anyway not specifically pertinent to this part, but the power flow screen does work very well. Happy New Year All!

 

[Cactus22]

I didn’t know I was missing this! Time to finally activate FORScan!

thanks Sam and Bobert!

 

[MattinNC]

Someone sent me this today and I decided to do a deep dive here and figure it out.

Make sure hybrid is enabled:
7D0-02-02 xx8x xxxx xxxx

Enable the power flow menu:
7D0-02-02 xxx6 xxxx xxxx WITH climate bar enabled
7D0-02-02 xxx4 xxxx xxxx WITHOUT climate bar enabled (what you have pictured).
I don't have access to a hybrid so I can't actually confirm this works but I'm pretty sure it will. Report back with your findings!

If you just want to enable the climate bar layout:
Enable unreal theme:
7D0-02-03 xxxx xxx1 xxxx
Enable Climate bar for non-hybrid:
7D0-02-02 xxx2 xxxx xxxx

If things look weird or don't show up reboot the apim by holding power and next track for 10s or reprogram nothing into it, or reboot with FORScan.

As always any parts or programming you need for these upgrades check out www.oemplusupgrades.com!

Excellent, thanks so much. I had the hybrid enabled but adding the climate bar and unreal theme was helpful and looks good. Like @Bobert47, I see the trip screens but they don't change.

Two things to note, and maybe you know how to enable them. The Fuel Economy screen does not up date. It will show when it switches to electric but no fuel economy. Also the climate bar looks good but only displays the temp for the drivers side, not the passenger side, is it possible to enable this aslo?

Thanks again...very helpful!

 

[brc710]

So I'm running into a few issues

I have everything hooked up but the display is not powering. I bought the passthrough cable from OEM+ and the apim is giving me a code saying it lost communication with the nav display and body control module and the RCM is throwing a code for lost communication to the APIM.

 

[brc710]

It seems that Ford makes APIM with GPS and without GPS.
The GPS antenna connector should be there, but this APIM doesn't have it.

Does anyone know how to find a OE replacement cable for the GPS? During the install of my sync 4 module I ended up breaking the GPS cable so now I no longer have GPS in my ‘22 IE no more location availability for my truck thru the ford pass app.

 

[RONR11]

If you can PM me a pic I have stripped 3 Maverick dash harnesses
I know I have some

 

[yeahiguessman]

Anybody have any spare parts or items from this swap they’re looking to part with? Struggling to find a cost effective screen or more recent APIM that will work.

 

[brc710]

Anybody have any spare parts or items from this swap they’re looking to part with? Struggling to find a cost effective screen or more recent APIM that will work.

Are you looking to do the 13” or 12” swap?

 

[yeahiguessman]

Are you looking to do the 13” or 12” swap?

Either honestly! I do prefer the 12, but either would be nice. It just feels like every time I’m checking eBay it’s super expensive now. :/

 

[brc710]

Either honestly! I do prefer the 12, but either would be nice. It just feels like every time I’m checking eBay it’s super expensive now. :/

The 12” transit screen seems to average about $350 or so. I had one for $250. The APIM just needs to be a sync 4 f-150 APIM that can support the 12” display. I think the one I ended up with was from a Lightning actually so I had to re do the whole as built.
All in I spent about $750 or so

 

[Cactus22]

If you can PM me a pic I have stripped 3 Maverick dash harnesses
I know I have some

Hey Ron - sent a PM. Looking for the usb cable from the module to the dual dash mount plug.

 

[yeahiguessman]

Does anyone here happen to know how essential or, hopefully, non essential these silver clips are after removing the screen? May have dropped one into the abyss Also does anyone know what size the screws are by chance?

Sponsored