Search results

Hi, I have tremor 25 sync4 asbuilt, I used to programm my retroffited mustang apim and all is working ok. I will share asap. Br

did you enabled "traffic jam" in ipc,ipma and pscm? you should use configuration text mode, all options were corrected in forscan in last versions.

Second version of my 13.2 screen installation. I've printed (with help of some expert in the 3d topic desing) 3 holders to adapt new Maverick screen. Next step is an extender to the rear cover , because large screen has a gap between dash and the rear part of it.

could you post a photo of it? thanks

On 2023 I changed to sync4 , and some months ago bought the 13.2" screen from the new maverick for a good price , and also got an apim from new mustang with 2025 software , It was really hard to mount (took me lot of hours making a good way to hold it) and also to program , but finally it s...

Use the ACM that is listed on the first page of this post. That code works ok, Bronco Sport ACM., I have the same, it's really better than the original ACM from Maverick. I think that there are two types, low-level and high-level. Try to get a high level, it has better sound.

Ok, I did from sync 2.5 to 4, without issues , try to get a new apim my23 or my24 , to get newest software, old software for my21 or 22 has errors

No, 13 is Mic , check diagrams on first page, all connections are pretty clear there acm for sync3 doesn't has mic input, so, you should connect mic from apim to mic on the truck (original acm female connector)

what is the message that you are receiving when pressing steering wheel button? you need a steering wheel icon on dash when it is pressed. it becomes green when is working and white when is standby Connecting forscan and checking 4 modules is the best way to check if function is active.

Hi, I am looking for the new Maverick screen 2025 to start this conversion (I already did conversion to sync 4 with the original 8" screen). I don't like the Escape screen. I know that there are already some crashed/totaled Mavericks, but I couldn't find any sellers on eBay. I am overseas. Any...

For 2025 models, with Sync4, you should activate all the things also in Apim instead of IPC Example: Global windows, TSR, and all vehicle settings are managed and stored in APIM Using normal configuration, there's no need to deal with the as-built.

Hi, it's the same as Escape I think it's a bug in the forscan soft, showing incorrect values Try this in asbuilt: (pdm and ddm modules) edit : not working anymore on new models, go for normal configuration R

Hi, it looks great! A short question, I installed the same cover. I ordered only 1 screw with nut (the left one that we can see in your cover). The cover has 3 more points of union with the engine (pressing makes them click) but my engine doesn't have anything on one of them. Did you put/add...

Hi, I can do a review of your truck remotely. I have a small business here, and I successfully retrofitted ACC in 5 trucks. You can check my ig @todofordsync3 R

Where did you take power for CCM? Ipma and CCM should have power at the same time. I remember an issue like yours when my CCM was temporarily connected. The root cause was that the CCM had power one or two seconds behind IPMA. Then I connected the ccm using ipma power wiring, now both boot at...

Sounds strange. Do a double-check in pins 3,4 from Sync to Gray connector. I think those are used for that. But I'm not sure 100% R

Nice, good work! your welcome regarding firmaware , for those that need it, I can share it. do you have a link for that shielded harness? Thks

for firmware update you just need forscan beta version or ucds, both are capable to flash firmware. there are lot of guides on how to do this on forscan forum . I can share firmware to anyone, but it s a ford property, its not posible to share in a public site.

let me say you that some ccm from different cars works well after firmware update. Hardware is the same and shared across different vehicles. I am using bronco sport ccm with maverick firmware flahsed into it.

I think it is related to a firmware compability, between sync4 and hvac module, I have the same issue, temperature is not showed in climate screen. Controls works ok (buttons and voice).