SYNC problems after recalls

[EONR24]

Not sure this will help anyone experiencing these issues but this could be helpful in fixing the problem.

https://www.ford.com/support/how-tos/sync/troubleshooting/why-is-sync-3-showing-a-blank-screen/

Sponsored

 

[Darnon]

Really? For example, the fix for the 24S27 taillight current monitoring issue was defective, causing 24S33 shifting to park at highway speeds. How is that not extremely dangerous? The software screwups are beyond belief.

The taillight recalls just reprogrammed the BCM. The park pawl position sensor fault that 24S33 addresses more likely would have been introduced via the 23E09 emissions recall, but other TSBs such as the EGR Flow Insufficient DTC, Manifold Air Leak DTC, "grabby brakes", or "shudder/rattle on ICE transition" would have [like 23E09] involved updating the PCM/SOBDMC.

 

[Ridingorange23]

Can you confirm that your power flow screen works still or is it blank like the picture I posted?

I looked under settings and couldn’t find power flow listed. Is it up under something else?

 

[EONR24]

I looked under settings and couldn’t find power flow listed. Is it up under something else?

To access the Power Flow feature, you can access by pressing the lightning bolt on the homepage

 

[Cactusgrayinny]

Can you confirm that your power flow screen works still or is it blank like the picture I posted?

This is interesting. I had the 2 recalls done last month without any issues. Last week, while I was driving my passenger was trying to navigate on the screen, we came upon this power-flow screen which I had never seen before. (We are both not very tech-strong) This power flow screen is a different representation of the information of the "EV Coach " screen. The latter being more helpful in actual driving anticipating using the throttle most effectively. The Power Flow does not help you here. I was really very pleased with Mav during my first encounter with HEAT in this vehicle. It has the best A/C I have had in any car. Additionally the ENGINE (ICE), only idles when necessary to keep the batteries charged. I was not anticipating this money and environment saving feature when I bought the truck

 

[rotla007]

Hold the radio power and track skip forward at the same time to reboot the unit, see if that brings it back

 

[Ridingorange23]

To access the Power Flow feature, you can access by pressing the lightning bolt on the homepage

Not sure what the power flow page is for but I found it.

 

[Ridingorange23]

Can you confirm that your power flow screen works still or is it blank like the picture I posted?

I found the page. Not sure what it’s for but it’s there.

 

[EONR24]

I found the page. Not sure what it’s for but it’s there.

Yeah yours works just fine so I am not sure what is causing this for some lariat owners. Maybe a reset can fix the issue.

 

[glider]

I found the page. Not sure what it’s for but it’s there.

It's in apps not settings

 

[STIGZZZ]

Can you confirm that your power flow screen works still or is it blank like the picture I posted?

YES no problems power flow is working great

Sponsored