Maxzina-Maverick Visor Rain Guards Demand

[Maxzina]

Introdue New Release---Visor Rain Guards

At present, we hope to obtain feedback from Mav owners on their demand for visor rain guards. This will determine the quantity of our first shipment.

Made of 3M adhesive and equipped with adhesive aid. Double fixing method (In channel), designed with 8 buckles to prevent dropping.
These visors are designed to withstand UV exposure as well as rain and snow.They serve the dual purpose of allowing fresh air into the cabin while keeping out rain, wind, and debris.

Now,we want to know the demand of this.Hope everyone can opinion.

Get more latest information about new release,come and join us (Maxzina Maverick Accessories)!!!

Sponsored

 

[TrailMaster]

Introdue New Release---Visor Rain Guards

At present, we hope to obtain feedback from Mav owners on their demand for visor rain guards. This will determine the quantity of our first shipment.

Made of 3M adhesive and equipped with adhesive aid. Double fixing method (In channel), designed with 8 buckles to prevent dropping.
These visors are designed to withstand UV exposure as well as rain and snow.They serve the dual purpose of allowing fresh air into the cabin while keeping out rain, wind, and debris.

Now,we want to know the demand of this.Hope everyone can opinion.

Get more latest information about new release,come and join us (Maxzina Maverick Accessories)!!!

A matte black would be preferable to the glossy black. To me, anyway.

 

[KathyG]

They look good - look like my egr vent visors.

 

[hdave]

I'd think there would be high-demand for in-channel visors.
I'd order if you don't include a logo like EGR did, that's why I didn't order EGR.
And I was going to hold out for weathetech, but they don't have rear visors yet.

 

[KathyG]

Yes , the egr does obstruct my mirrors a bit. You're right - the Maxinas look slimmed down in that area!

 

[Glen Baker LLC]

They probably had to trim down the front by the mirror because they look solid, in other words non-transparent.
From another poster mentioned having their mirror blocked??
I don't understand how tinted piece of transparent plastic blocks your mirror any more than having your windows tinted.

For stick-ons I really like the ones below they had to be trimmed to fit this nicely though.

 

[T Bone]

I'd think there would be high-demand for in-channel visors.
I'd order if you don't include a logo like EGR did, that's why I didn't order EGR.
And I was going to hold out for weathetech, but they don't have rear visors yet.

just a heads up, that egr logo is held on with two sided tape, took me about 1/2 a second to flick them off. i love em.

 

[Redline]

I would be interested had I not installed the EGRs a few months ago. I like the slimmer bottom by the mirror and the fact that the front visors have two sided tape to hold them in place. My front EGR visors don't have tape and the back of the visor comes down out of the channel when I roll down the window. I can push it back up in the channel rather easily, but it needs tape to hold it. Unfortunately, that will have to wait until Spring as it 15°F out and the tape won't stick.

 

[Glen Baker LLC]

I would be interested had I not installed the EGRs a few months ago. I like the slimmer bottom by the mirror and the fact that the front visors have two sided tape to hold them in place. My front EGR visors don't have tape and the back of the visor comes down out of the channel when I roll down the window. I can push it back up in the channel rather easily, but it needs tape to hold it. Unfortunately, that will have to wait until Spring as it 15°F out and the tape won't stick.

When I was installing my EGR window visors. I posted about using very thin (non-foam) double-sided tape. Because the EGR did not come with tape for the front.
This is what I used. Notice on the second picture how thin the tape is.

 

[Maxzina]

Yes.Some owners have also provided feedback to us regarding the weather conditions of EGR. It is also due to the issue of obstructing the line of sight. We deliberately made the front part thinner to avoid obstructing the view.

 

[Maxzina]

I'd think there would be high-demand for in-channel visors.
I'd order if you don't include a logo like EGR did, that's why I didn't order EGR.
And I was going to hold out for weathetech, but they don't have rear visors yet.

Yeah.We do not include a logo.

 

[Maxzina]

They probably had to trim down the front by the mirror because they look solid, in other words non-transparent.
From another poster mentioned having their mirror blocked??
I don't understand how tinted piece of transparent plastic blocks your mirror any more than having your windows tinted.

For stick-ons I really like the ones below they had to be trimmed to fit this nicely though.

Looks good!

 

[Maxzina]

Yes , the egr does obstruct my mirrors a bit. You're right - the Maxinas look slimmed down in that area!

Thanks!

 

[Toddman45]

Those look great, almost identical to the EGR in channels. The width of the lower front visors do obstruct the outside rearview mirrors.

Sponsored