Current go to soft/fold

[Area51BS]

What’s the current go to soft folding tonneau cover. Haven’t looked in a few years. Reasonably priced with good quality.

Sponsored

 

[Brewmstr]

What’s the current go to soft folding tonneau cover. Haven’t looked in a few years. Reasonably priced with good quality.

I just installed the truxedo prox15. Under $500 from real truck ask for Maverick truck club discount. Very easy to install. Really liked the way it doesn’t stick up too much. Quality of the material feels
Tough.

 

[dalola]

Check out Extang Trifecta Signature Series, soft tri-fold. Very happy with mine, super easy to R&R as well.

 

[MavChris]

I have had my tri fold soft cover from Rough Country for almost a year now. Easy to install. Very little leakage and material still looks new. Very little flapping even at highway speeds.

https://www.roughcountry.com/produc...Qd6k2Fki7dcmgq2xN_B3hLbgbdZLn_TRoCOlwQAvD_BwE

 

[Scupking]

Gator sfx tri-fold is the cheap go to cover. Simple to put on and take off.

 

[commadorebob]

Tonno Pro Lo Roll, Soft Roll-up Truck Bed Tonneau Cover.

Not a soft-fold, but works great.

Bought at Amazon.

 

[Area51BS]

Gator sfx tri-fold is the cheap go to cover. Simple to put on and take off.

Look good for the price

 

[Area51BS]

I just installed the truxedo prox15. Under $500 from real truck ask for Maverick truck club discount. Very easy to install. Really liked the way it doesn’t stick up too much. Quality of the material feels
Tough.

I like the very low profile

 

[ABTremor]

https://www.amazon.com/Tyger-Auto-T...+cover&qid=1707599611&sprefix=,aps,131&sr=8-3

This is the one I installed. Fits great and no leaks. In my opinion, can't beat it for the price.

 

[Snowbird]

https://www.amazon.com/Tyger-Auto-Tri-Fold-Compatible-TG-BC3F1061/dp/B0B1VW91D5/ref=mp_s_a_1_3?crid=2VQMMLUDUVUGN&keywords=ford+maverick+tonneau+cover&qid=1707599611&sprefix=,aps,131&sr=8-3

This is the one I installed. Fits great and no leaks. In my opinion, can't beat it for the price.

I have the same one and the same opinion.

 

[Cape Breton]

I just installed the truxedo prox15. Under $500 from real truck ask for Maverick truck club discount. Very easy to install. Really liked the way it doesn’t stick up too much. Quality of the material feels
Tough.

I also just installed this over and love it.

 

[Kagiso]

https://www.amazon.com/Tyger-Auto-Tri-Fold-Compatible-TG-BC3F1061/dp/B0B1VW91D5/ref=mp_s_a_1_3?crid=2VQMMLUDUVUGN&keywords=ford+maverick+tonneau+cover&qid=1707599611&sprefix=,aps,131&sr=8-3

This is the one I installed. Fits great and no leaks. In my opinion, can't beat it for the price.

Thanks! Looks great. Affordable. 4.8 stars with 500+ reviews. Customers usually keep it. I'm sold.

 

[fossil]

Thanks! Looks great. Affordable. 4.8 stars with 500+ reviews. Customers usually keep it. I'm sold.

I concur and all of their T3 models are rated high, 80% 5 star or better, 87% on the Maverick. This is my Tyger T3 minutes after install, installed it without climbing into the bed. I used a thinner D bulb weather seal at the front instead of the thicker square shaped seal provided. The D bulb I used is just like the one Tyger uses for the perimeter seal. $239

 

[ABTremor]

The D bulb seal was supplied with mine. I took the extra step of cutting some 1.5" lengths of the seal to create 4 pieces @ 1/4" wide to place in the joint between the plastic side rail caps on both sides of the bed and at the plastic to metal transition on the front bed rail. Then installed the D bulb over it ( bulb seal only along the front rail)
I tested it during install by pouring a gallon of water over the cover, and no leakage. So far it's still weather tight and looking good

 

[Toy Truck]

I'm very happy with the one that I got from Ford as my only option.

Sponsored