8" screen (Sync 3) upgraded to 12" screen (Sync 4)

[Cactus22]

Ordered my kit yesterday. Going to add a USB charger to the inside of the top cubby (I have a similar phone mount tray in mine already as well). This should reduce the cables going up/down.
This should fit nicely and the back portion will go in the empty space that the side cubby currently is occupying.
https://www.amazon.com/gp/product/B0CD7R9NV3

Sponsored

 

[Uncle Buck]

Where did you buy this from (URL) and will it work on lower trim levels?

 

[Uncle Buck]

They have one to upgrade any Maverick without sync 3. i.e. the synce 2.4 base infotainment in the XL and XLT models. It's even more $$$.

That's to upgrade a Lariat only. Not XL or XLT Sync 2.5

 

[Uncle Buck]

You must have been the only one to get it for 1200.00. Its now closer to 1800.00. Looks great.

The $1800 one is for vehicals that have sync 2. If you have sync 3 it's a bit less.

 

[Darthie]

The $1800 one is for vehicals that have sync 2. If you have sync 3 it's a bit less.

Its like 1500 now. A far cry from 1200 which was at the top but doable.

 

[Red Eyes - Wide Shut]

Hopefully at some point there will be an aftermarket option. Maybe from American Standard. I think their Sync will be much better and cheaper than Fords.

 

[KG35]

What type of seat covers do you have? They look super comfy

 

[Mavreezy]

What type of seat covers do you have? They look super comfy

They're the typical Chinese covers off Amazon. The brand is TIEHESYT. I've used a couple of different brands before, but I found that these match the brown trim in my Lariat the best.

They're pretty comfortable. I was going to toss the headrest pillows that came with the seat covers, but I noticed they provided good lumbar support for my neck, especially on long trips.

The link is below if you're interested.

https://a.co/d/0h5LsV5

 

[RONR11]

With the help of Sam(OEMPLUS) I was able to install a 13” escape in mine. I first bought a knob overlay( black) the made a 3/4 spacer covered in black vinyl then centered monitor using the .
Drilled 3 holes to mount the alignment pins in bottom frame then cut frame 1/8” at a time using dremmel to level screen. The tray still fits without cutting Sam will work with any piece meal kit you need as you can buy a monitor on eBay or Car Parts . Com and build your own

 

[Mavreezy]

With the help of Sam(OEMPLUS) I was able to install a 13” escape in mine. I first bought a knob overlay( black) the made a 3/4 spacer covered in black vinyl then centered monitor using the .
Drilled 3 holes to mount the alignment pins in bottom frame then cut frame 1/8” at a time using dremmel to level screen. The tray still fits without cutting Sam will work with any piece meal kit you need as you can buy a monitor on eBay or Car Parts . Com and build your own

Nice job.

Could you you take some pictures from afar so I can see how the whole setup looks?

 

[Toddman45]

Hopefully at some point there will be an aftermarket option. Maybe from American Standard. I think their Sync will be much better and cheaper than Fords.

Agreed, I'd much rather have a Kenwood Excelon or Apline HU with AA wireless built HD Radio and more than anything ford offers.

 

[KG35]

They're the typical Chinese covers off Amazon. The brand is TIEHESYT. I've used a couple of different brands before, but I found that these match the brown trim in my Lariat the best.

They're pretty comfortable. I was going to toss the headrest pillows that came with the seat covers, but I noticed they provided good lumbar support for my neck, especially on long trips.

The link is below if you're interested.

https://a.co/d/0h5LsV5

Thanks!

 

[RONR11]

Nice job.

Could you you take some pictures from afar so I can see how the whole setup looks?

Nice job.

Could you you take some pictures from afar so I can see how the whole setup looks?

 

[Mavreezy]

It looks good! Well done, young man

 

[Uncle Buck]

Thanks for sharing. I wasn't aware this was an option. I'll wait for a sale and grab one. The screen is my biggest frustration with my Mav. And its a small complaint; I am very happy with this truck. $1200 to keep me happy and delay a $30k 'upgrade'.

Time to install start to finish?

Did you ever get one? I would be curious to know your experience.

Sponsored