Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

[ryan2366]

If anyone is looking for a sync4 APIM or a 13.2” screen message me. I bought both but have since decided not to install as my dealership was sceptical of these types of mods. Looking to sell both

Sponsored

 

[breeves002]

that is pretty damn cool, if you sell it all for a reasonable price I'm sure you'll have takers!

I'm probably going to retail it as $249.95 for the bracket & harness with $50 off for the forum members. So $199 for you guys. I'm not sure if that sounds reasonable to you guys but thats what I'm thinking.

 

[Bwillie]

I'm probably going to retail it as $249.95 for the bracket & harness with $50 off for the forum members. So $199 for you guys. I'm not sure if that sounds reasonable to you guys but thats what I'm thinking.

Count me in!

 

[breeves002]

Count me in!

Sweet, I will post when the bracket is available (hopefully this week), and harnesses are about a month out. It just takes a while to get the connectors to build them in bulk. It's way too expensive and time consuming to build them with the pigtails like people have been doing.

 

[colinl]

I'm probably going to retail it as $249.95 for the bracket & harness with $50 off for the forum members. So $199 for you guys. I'm not sure if that sounds reasonable to you guys but thats what I'm thinking.

I personally think it is reasonable, yes.

I've never really looked into it, but I think you'll have to register as a forum vendor to advertise it here.

 

[elizabethk314]

I'm probably going to retail it as $249.95 for the bracket & harness with $50 off for the forum members. So $199 for you guys. I'm not sure if that sounds reasonable to you guys but thats what I'm thinking.

I’m in

 

[Billzilla15]

For anyone lurking here that wants my OG setup as detailed in the first post. I am returning my truck to stock to get into a lightning. Send me a message and we can talk

 

[FischAutoTechGarten]

Working on a bracket for the 12" screen as well as a plug n play harness for it from base model truck and from lariat trucks (already have that harness done). It'll probably be a month before I have harnesses in stock but the brackets hopefully will be this week or next! This will allow the factory plastics to clip in and will be making side pieces that clip into the factory trim to cover the gap between the dash and screen.

Sounds awesome to me.... That's what I want is the 12" Transit screen...

 

[Gullzway]

Do these newer APIM's all have the ability to disable Wireless App projection in settings?

My loaner 2025 Bronco Sport would not let me use my AAWireless adapter until I found this setting and turned it off. Yes I want to disable the built in wireless AA and use my adapter. It has a developer mode that lets me use Carstream/Fermata Auto.

 

[watajob]

I'd love to do this and the F150 shifter mod but tried to talk about it to my Ford dealer service advisor but he broke out in the hives when I mentioned it. I'm sure if a rear CV axle needed to be replaced, they'd somehow blame it on one/both of those. Plus, I have the bumper to bumper 10 year/100K mile ESP plan so... oh, well.

 

[Gullzway]

Confused on the plethera of APIm models available.
I do not want navigation, but do the models without navigation work with the larger screens and SiriusXM?

If not, can navigation be disabled on the nav models so that it doesn't come up on the screen?

Both of these are from a 2023 escape, not sure which one I would need.
PU5T-14G670-FFR
PU5T-14G670-EVV(or EVR as well)

Edit: Top model w/o Nav looks like it's for 8" screens. I haven't found a model for 12" screens w/o Navigation.

 

[Billzilla15]

Confused on the plethera of APIm models available.
I do not want navigation, but do the models without navigation work with the larger screens and SiriusXM?

If not, can navigation be disabled on the nav models so that it doesn't come up on the screen?

Both of these are from a 2023 escape, not sure which one I would need.
PU5T-14G670-FFR
PU5T-14G670-EVV(or EVR as well)

Edit: Top model w/o Nav looks like it's for 8" screens. I haven't found a model for 12" screens w/o Navigation.

you are correct. the six fin display connector is for 12+ and the 4 pin is for -12 in screens.

i think your going to be hard pressed to find one without nav for the 12+ almost everything has it now. you may be able to turn it off it off in forscan not sure tho.

why no nav?

 

[Billzilla15]

Well everyone, my time has come. i returned the truck to stock yesterday and will be selling it later this week, this was a fun project. hopefully i can still be of some assistance if anyone else wants to get into this. the truck was great just too small for my family currently. my radio has also been sold so maybe he'll pop in here once he gets it up and running

 

[Bobert47]

Well everyone, my time has come. i returned the truck to stock yesterday and will be selling it later this week, this was a fun project. hopefully i can still be of some assistance if anyone else wants to get into this. the truck was great just too small for my family currently. my radio has also been sold so maybe he'll pop in here once he gets it up and running

Hope to still you see you around the forum from time to time! Thanks again for everything!

 

[RONR11]

Well everyone, my time has come. i returned the truck to stock yesterday and will be selling it later this week, this was a fun project. hopefully i can still be of some assistance if anyone else wants to get into this. the truck was great just too small for my family currently. my radio has also been sold so maybe he'll pop in here once he gets it up and running

Thanks again for all your help Bill
May bug you once in awhile, still got a few issues

Sponsored