Mabett | Shield Cover for Underbody Cavity Behind Left Rear Tire Available Now!

[AlpineKid74]

@MABETT Checked at Amazon an nothing yet.
Any word on when these will be available again??

Sponsored

 

[C'ville]

From my experience in product design, it always takes a couple of iterations to tweak the optimal design.

 

[MABETT]

@MABETT Checked at Amazon an nothing yet.
Any word on when these will be available again??

They are expected to be available again in early January.

 

[TORQUERULES]

The inspiration for this product came from an earlier post, discussing how to provide protection for the underbody blank area behind the rear left wheel. In addition, many people privately messaged me asking if I could develop a product to provide protection for this area. Meeting the needs of our customers is our mission. Therefore, in the end, we managed to create it.

We’re thrilled to announce the launch of the Mabett Underbody Cavity Shield Cover for Ford Maverick.

Buy directly via the link below, 20% discount exclusive for MTC.

https://www.amazon.com/promocode/A3KWV8B44CM6UU

Why you need the Mabett Underbody Cavity Shield Cover?

This concerns the open cavity at the bottom of the vehicle behind the left rear tire（Perhaps some of you are not aware of this).

There are a lot of exposed wiring in this area. The interior body panels are open and the tail light assemblies is visible. Accumulated dirt and mud in this area, along with salt and snow can lead to potential rust issues. Our shield cover can solve the problem perfectly.

Key Features

Enhanced Vehicle Defense: Whether you're navigating muddy backroads, snow covered streets, or rocky trails, the underbody cavity shield cover well protection pad silently guards your vehicle. It keeps your vehicle’s underside clean and free from rust and dirt buildup, no matter the road conditions.

Durable, Rust-Resistant Materials: Built with premium aluminum alloy and coated with a corrosion-resistant finish, this cover offers long-lasting protection in any climate.

Noiseless design: The pad fits perfectly against your vehicle, securely in place without any rattling during your drive.

Quick and Simple Setup: Easily secure with screws, no need for any vehicle modifications.

The initial batch of goods has limited stock. The discount is available for a limited time of one week. If you need it, do not hesitate.

Join our community to stay updated with the latest product releases, exclusive promotion discounts and abundant opportunities for free product trials.

Make a belly pan/shield for under the engine and transmission to replace the crappy factory felt one, with doors for oil change access, and you will sell thousands.

 

[MABETT]

Make a belly pan/shield for under the engine and transmission to replace the crappy factory felt one, with doors for oil change access, and you will sell thousands.

Thank you for your suggestion!

 

[dn325ci]

installed mine yesterday when the weather was briefly nice. I bought the Home Depot linked bolts from this thread and left everything loose until the very end. Both points turned out to be excellent advice. No problems. Probably took me about an hour. No muffler is in the way on a ‘24 ecoboost AWD.

 

[AlpineKid74]

The inspiration for this product came from an earlier post, discussing how to provide protection for the underbody blank area behind the rear left wheel. In addition, many people privately messaged me asking if I could develop a product to provide protection for this area. Meeting the needs of our customers is our mission. Therefore, in the end, we managed to create it.

We’re thrilled to announce the launch of the Mabett Underbody Cavity Shield Cover for Ford Maverick.

Buy directly via the link below, 20% discount exclusive for MTC.

https://www.amazon.com/promocode/A3KWV8B44CM6UU

Why you need the Mabett Underbody Cavity Shield Cover?

This concerns the open cavity at the bottom of the vehicle behind the left rear tire（Perhaps some of you are not aware of this).

There are a lot of exposed wiring in this area. The interior body panels are open and the tail light assemblies is visible. Accumulated dirt and mud in this area, along with salt and snow can lead to potential rust issues. Our shield cover can solve the problem perfectly.

Key Features

Enhanced Vehicle Defense: Whether you're navigating muddy backroads, snow covered streets, or rocky trails, the underbody cavity shield cover well protection pad silently guards your vehicle. It keeps your vehicle’s underside clean and free from rust and dirt buildup, no matter the road conditions.

Durable, Rust-Resistant Materials: Built with premium aluminum alloy and coated with a corrosion-resistant finish, this cover offers long-lasting protection in any climate.

Noiseless design: The pad fits perfectly against your vehicle, securely in place without any rattling during your drive.

Quick and Simple Setup: Easily secure with screws, no need for any vehicle modifications.

The initial batch of goods has limited stock. The discount is available for a limited time of one week. If you need it, do not hesitate.

Join our community to stay updated with the latest product releases, exclusive promotion discounts and abundant opportunities for free product trials.

When will these be available at Amazon again?? Hopefully by end of January, first part of February.

 

[MABETT]

When will these be available at Amazon again?? Hopefully by end of January, first part of February.

The next batch is on its way and is expected to be available for sale in January.

 

[710-oil-614]

@MABETT - Any update on availability? Picking mine up Thursday and already disappointed I won't have this ready to install from day 1.

Would be nice to get it soon.

 

[Nw_adventure]

@MABETT - Any update on availability? Picking mine up Thursday and already disappointed I won't have this ready to install from day 1.

Would be nice to get it soon.

Mudflaps should be a day one addition.

 

[710-oil-614]

Mudflaps should be a day one addition.

Have a set of rear WeatherTechs in the garage waiting, but I'd really like the @MABETT covering for the remaining hole.

 

[Nw_adventure]

Have a set of rear WeatherTechs in the garage waiting, but I'd really like the @MABETT covering for the remaining hole.

Cool. I returned my M/Shield hoping version 2 includes a one piece assembly and better hardware. My tailgate does ooze out dust/dirt onto the rear bumper after lots of off road adventures - Guess the plate would help with what the mudflaps don't catch.

 

[710-oil-614]

Cool. I returned my M/Shield hoping version 2 includes a one piece assembly and better hardware. My tailgate does ooze out dust/dirt onto the rear bumper after lots of off road adventures - Guess the plate would help with what the mudflaps don't catch.

I also have a 3D printed tailgate hole cover as well.

I've got well over $1k worth of accessories to install.

 

[Nw_adventure]

I also have a 3D printed tailgate hole cover as well.

I've got well over $1k worth of accessories to install.

I put the tailgate hole cover on awhile back- I might try to take it off and spray a hose up in there and see if that flushes out all the hidden gunk-

 

[Ray-n-AVL]

The next batch is on its way and is expected to be available for sale in January.

Has anything changed?

Sponsored