Under Seat Vent Extenders

[Dad]

This is the view with the seat mid way back.

That's not bad. I'm thinking you slid the seat all the way up to get a clear picture. With the seat in a "normal" position do the extenders get in the way?

Sponsored

 

[Glen Baker LLC]

This is the view with the seat mid way back.

That's not bad. I'm thinking you slid the seat all the way up to get a clear picture. With the seat in a "normal" position do the extenders get in the way?

Looking at the picture above.
Figuring most people would be keeping their feet within the confines of the rubber floor mat. It looks like the vent extender is safe from being kicked. Plus the added benefit of having the seat extend over the vent.

 

[Thex]

MY son is 6'1" and he said it never got in his way.

 

[wax87]

MY son is 6'1" and he said it never got in his way.

do you have a price for the file if you want to share it?

 

[zach57x]

Mabbett has these-
https://www.amazon.com/Mabett-Deflectors-Accessories-Conditioning-Directional/dp/B0DGT6WXPR/ref=sr_1_23?crid=14P7Q2JP47O8X&dib=eyJ2IjoiMSJ9.KS6dubIDmflzK8VonGVj9HzgpKxVpP9gR9R2L9zfTwNz_oluqxTVsJkTNOqYsKE4g4JMyISWNLJ8xQvuiqR1qsXkX-ADuHsR93kUOvKUrGamqd9iB3HLI9Ru0v8l3o9b6wez8B0nc29G_sX8sH5UhkTY8oY0z4yBG_t0bRwM2-XDtrB7CU49A2Wfwec8fAqQZ8hr-Ce_FQYd6MuWyshUfsfGc7txRsrXVn7cms32GLtMYOnJTMu7s9OKyHdpLBj6hvH0KrUmvsdSxLmh2DJfyI8Cu-a1SMbEufBFX01WzfiDDEzrQ1-pIPv0DvmyXfT-ejYdixsnyy9nfqUiNl4LfFKYiqizKtzCsDtGDsvpKVBWlzEvLTxDNBwOkFmD4735VysDVVGvwp7mm-sbBubSGZFLLohJrmG7TuFRB1gQbj5G4Wajf-3vrs00efbSunIu.vO1hwKiq8UyX-bVFSvNQSCI7KpGZNlTWk8_n6pVzC0I&dib_tag=se&keywords=mabbett+maverick&qid=1740067789&sprefix=mabbet,aps,167&sr=8-23

So there's two problems with these. One is the fact they extend into the footwell so people can easily kick them and knock them out of place. But the other is the fact that the extender has 2 bends before outputting the air. This will reduce the airflow to some degree. I'd rather go with the F150 design since that is a straight output with no bends

 

[wax87]

So there's two problems with these. One is the fact they extend into the footwell so people can easily kick them and knock them out of place. But the other is the fact that the extender has 2 bends before outputting the air. This will reduce the airflow to some degree. I'd rather go with the F150 design since that is a straight output with no bends

Thanks, but I will pass

 

[Thex]

do you have a price for the file if you want to share it?

You know, I really want to share the file on thingiverse/printables, but people are just taking those files and selling as their own.

Are you just wanting to print this yourself?

 

[cwstnsko]

You know, I really want to share the file on thingiverse/printables, but people are just taking those files and selling as their own.

Are you just wanting to print this yourself?

From what I can tell from the photos, very similar, if not identical vent extensions to the ones in the 1st post are already available with a few re-mixes for various use cases on Makerworld

 

[wax87]

You know, I really want to share the file on thingiverse/printables, but people are just taking those files and selling as their own.

Are you just wanting to print this yourself?

Yes Sir, I guy in my Civil Air patrol squadron has a printer and he said he would print them for me

 

[Thex]

Yes Sir, I guy in my Civil Air patrol squadron has a printer and he said he would print them for me

Sent you a PM with the file.

 

[Thex]

From what I can tell from the photos, very similar, if not identical vent extensions to the ones in the 1st post are already available with a few re-mixes for various use cases on Makerworld

I did try those on makerworld - i mean why reinvent the wheel. However they were too wide/short. So I created my own version.

 

[Dad]

So there's two problems with these. One is the fact they extend into the footwell so people can easily kick them and knock them out of place. But the other is the fact that the extender has 2 bends before outputting the air. This will reduce the airflow to some degree. I'd rather go with the F150 design since that is a straight output with no bends

Agreed. Plus, I don't have a 3D printer

 

[Thex]

OK. I had a weekend to think about it and I decided to post this on thingiverse.
Ford Maverick Rear Sent Vent Extender by thexter - Thingiverse

 

[cwstnsko]

OK. I had a weekend to think about it and I decided to post this on thingiverse.
Ford Maverick Rear Sent Vent Extender by thexter - Thingiverse

Nice, I printed one of the F-150 versions from Makerworld, and they fit the Lightning perfectly, but did not fit the maverick well. I’ll print a set of these for the Maverick

 

[cwstnsko]

Nice, I printed one of the F-150 versions from Makerworld, and they fit the Lightning perfectly, but did not fit the maverick well. I’ll print a set of these for the Maverick

To follow up, I printed a set of these today and they fit my 2025 Maverick hybrid AWD, very well.
Thanks so much for sharing the files on Thingiverse.

Sponsored