- First Name
- Chris
- Joined
- Nov 23, 2021
- Threads
- 29
- Messages
- 312
- Reaction score
- 499
- Location
- Longwood, FL
- Vehicle(s)
- 2023 Ford Maverick XLT
- Engine
- 2.0L EcoBoost
- Thread starter
- #1
I just picked up my 23 maverick and since remote start (other than ford pass) isn't included anymore I wanted remote start. DId some research and bought this while waiting for my mav to arrive. https://www.amazon.com/Start-X-Star...d2-6fac8631a94e&ref_=pd_gw_ci_mcx_mr_hp_atf_m
This took all of 4 mins to install and works perfectly. Lock/Unlock/Lock and the mav starts right up.
Quick rundown of install, unplug ODBII connection from connector under dash, plug in provided harness end to that cable, then plug the other end into the ODBII factory connector. Hold the programming button down, insert black connector to program module.
Wait till you see only blue LED, (this is a series of flashing leds red/blue/yellow) you have to time letting it go to when the blue is lit. Insert the white connector into the module. Turn on the ignition with the key, blue led will turn off, red and yellow leds will turn on.
Wait up to 45 seconds until the blue led starts flashing. Turn off the ignition, all leds will turn off. Turn on the ignition, the yellow led will turn on, wait 5 seconds. Turn off the ignition. You are DONE!
I literally just did this, and it took me like 4-5 mins I spent more time unplugging and plugging in the ODBII connection and wire tying the module under the dash than anything else. This is super quick and works great!
This took all of 4 mins to install and works perfectly. Lock/Unlock/Lock and the mav starts right up.
Quick rundown of install, unplug ODBII connection from connector under dash, plug in provided harness end to that cable, then plug the other end into the ODBII factory connector. Hold the programming button down, insert black connector to program module.
Wait till you see only blue LED, (this is a series of flashing leds red/blue/yellow) you have to time letting it go to when the blue is lit. Insert the white connector into the module. Turn on the ignition with the key, blue led will turn off, red and yellow leds will turn on.
Wait up to 45 seconds until the blue led starts flashing. Turn off the ignition, all leds will turn off. Turn on the ignition, the yellow led will turn on, wait 5 seconds. Turn off the ignition. You are DONE!
I literally just did this, and it took me like 4-5 mins I spent more time unplugging and plugging in the ODBII connection and wire tying the module under the dash than anything else. This is super quick and works great!
Sponsored