Rear end lowering

[Zanky]

Has anyone lowered just the rear end & if so what parts?

Sponsored

 

[Vettereddie]

No rear-end only leveling kits to lower it to my knowledge, Steeda may be considering it based on this post

https://www.mavericktruckclub.com/f...ont-leveling-kit-2022-2026.82739/post-1367629

 

[aldaman014]

I used the rear coils of an Escape. I’ve heard others used ones from the Lobo. Pics for reference

 

[Tbone289]

FWD or AWD?

If AWD, the Lobo rear springs work great, and aren't expensive.

See here: https://www.mavericktruckclub.com/f...ing-compatibility-lobo-4k.64473/#post-1078768

 

[Bobby Chapman]

I would like just rear as well , the aftermarket headlights I put in do not adjust high enough, so lowing back a little would help me .

 

[Treadz]

I used the rear coils of an Escape. I’ve heard others used ones from the Lobo. Pics for reference

Is yours AWD or FWD? Looks good.

 

[Mox4615]

I used the rear coils of an Escape. I’ve heard others used ones from the Lobo. Pics for reference

That looks comparable to what the lobo springs look like installed. I wonder if the payload capacity is any different.

 

[aldaman014]

It’s an AWD

Is yours AWD or FWD? Looks good.

 

[Bobby Chapman]

Is yours AWD or FWD? Looks good.

That looks comparable to what the lobo springs look like installed. I wonder if the payload capacity is any different.

Mine is an xl, 2023 2.0 eco

 

[Carbonized Nate]

I would like just rear as well , the aftermarket headlights I put in do not adjust high enough, so lowing back a little would help me .

What headlights?

 

[Carbonized Nate]

That looks comparable to what the lobo springs look like installed. I wonder if the payload capacity is any different.

That looks comparable to what the lobo springs look like installed. I wonder if the payload capacity is any different.

Heres my reasoning
https://www.mavericktruckclub.com/forum/threads/rear-spring-compatibility-lobo-4k.64473/post-1408697

 

[Bobby Chapman]

What headlights?

https://a.co/d/0fQ4EZOd
From Amazon

 

[K9-DAD]

Installed the OEM ford LOBO spring kit part number M-5300-MV $140.00
These are Only for AWD
I only installed the rear springs supplied in kit plus new hardware that is included in kit.
Back is now 33 1/4
Front is now 32 3/4
Going in for alignment today will post update of before and after

 

[Mox4615]

Installed the OEM ford LOBO spring kit part number M-5300-MV $140.00
These are Only for AWD
I only installed the rear springs supplied in kit plus new hardware that is included in kit.
Back is now 33 1/4
Front is now 32 3/4
Going in for alignment today will post update of before and after

Is it noticeable to you? I ordered the same kit because of how cheap it was but haven’t put it on yet. I measured the rear stock height and it’s like 34 1/8, So that measurement you took with the rear springs installed is barely even an inch different from stock, so I was curious if you actually noticed a difference.

 

[K9-DAD]

Yes definitely it lost the rake that the truck has from factory
From my hitch to the ground it lowered 1.5 inches from before install.
Completely worth it to me.
Jus remember to remove the shock lower bolt And the lower spindle bolt

Sponsored