Non-Slip surface for bed floor?

[Decayed]

Do the ones presized for the mav bed fit inside the bed tray liner? The internal dimensions would be smaller due to the tray.

You may want to just get a big rubber entrance mat and call it a day.

Sponsored

 

[Gray Goose]

A free option is used anti-slip trailer mats. These are used in semi-trailers and often thrown out after a load. Likely need to have connections to a CDL operator. That is how I got a few rolls.

https://www.rubbercal.com/rubber-fl...ooring/elephant-bark-rubberized-flooring.html

 

[Pee Dee]

The Ford mats are currently on back order. I’m waiting on one of those myself.

If you decide on some other options I’d suggest getting something that fits pretty snugly or is a heavy enough material that it won’t be blown out of the bed at highway speeds. Don’t ask me how I know!

 

[fossil]

Do the ones presized for the mav bed fit inside the bed tray liner? The internal dimensions would be smaller due to the tray.

Very good question. Based on my photo I'd say some trimming would be required, especially at the rear sides

 

[SparkyUWH]

I used a set of softer floor tiles. Bought the pack for $20.
https://www.amazon.com/We-Sell-Mats-Borders-Interlocking/dp/B011W2I1YG/?th=1

Just taped them on the bottom with duct tape and cut to fit. Took 15 minutes. I planned on this only being a temporary fit until I could get in for a spray in bedliner, but it' been there for over a year now.

 

[F50]

I purchased my Maverick with the Bed Tray Liner. I'm looking for something to put on the bed that will stop things from sliding around. I want something that is not a permanent solution but removable. Thank you for any advice.

I went with the rough country bed mat. It was about $100. Then i bought the plastic tailgate liner for $80. The tailgate liner is nice and slick making it easy to push items into the bed. For my hauling, this is the best set up. The aftermarket spray in where i live is $700. And the bed liner makes everything too slick

 

[40caliber]

The ford mat is well worth it. I got lucky they had one in stock. Fine fit with spray in liner.

 

[jollyrogerreefer]

I think one of the first things I grabbed for my Mav was the rough county bed mat. Fits well, doesn't slide around, and takes a beating. Mine doesn't have the branding on it, but it holds up what I need it for, didn't want to dent the bed with rocks and firewood.

 

[Vickram]

I purchased my Maverick with the Bed Tray Liner. I'm looking for something to put on the bed that will stop things from sliding around. I want something that is not a permanent solution but removable. Thank you for any advice.

Try these .

1. 
   

Designer's Image™ 18 x 18 Interlocking Foam Tiles (9 sq.ft/pkg)
Model Number: RCY18180 Menards ® SKU: 7655058

Everyday Low Price

$13.99

SALE PRICE
Good Through 2/18/24
$ 13 39
/pkg



$1.49 /sq.ft

 

[MJL]

I bought this yesterday, fits in between wheel wheels and runs 95% front to back. I have a drop in liner and this keeps everything from sliding plus roils up easy if needed..Home Depot

 

[Ozarkbeard]

Yes I do.

Buy the Maverick OEM rubber bed mat from a dealer, using your points.

 

[MetalsGeek]

After a year, I've been pretty happy with the DeeZee #87027 Rubber Bed Mat. It's heavy enough to stay in place and keeps things from sliding around.

 

[ABTremor]

Same. I like the mat but the original smell of rubber is strong. Does it die down?

After a while the smell does die down considerably, I've had mine for 5 months now and I don't find that fresh rubber smell noticeable anymore.

 

[Decayed]

I used a set of softer floor tiles. Bought the pack for $20.
https://www.amazon.com/We-Sell-Mats-Borders-Interlocking/dp/B011W2I1YG/?th=1

Just taped them on the bottom with duct tape and cut to fit. Took 15 minutes. I planned on this only being a temporary fit until I could get in for a spray in bedliner, but it' been there for over a year now.

$20 and still going strong after a year? Yeah, you ain't replacing that!

That's awesome!

 

[kkreit01]

Stay clear of the Husky rubber mat. It's not near as "sticky" as I wished. I've had the TrailFX and DeeZee in the past, and they were much better. PS> you can find ones on Marketplace for dirt cheap, and then cut to size. I'd prefer the Ford one, but I have DIBL.

Sponsored