Mud guards (slim low profile) for Lobo?

[Saltybeard105!]

Looking for a slim low profile mud flap or guard for front and rear on a lobo something that doesn't look dorky.

Sponsored

 

[Cancunbadlands]

Try @MABETT

 

[Hot Runr Guy]

Looking for a slim low profile mud flap or guard for front and rear on a lobo something that doesn't look dorky.

I would start with a set of RokBlokz, order in the color you want, and trim them down to achieve the look you're after.

https://rokblokz.com/products/ford-maverick-2022-mud-flaps

HRG

 

[MiMav]

I would start with a set of RokBlokz, order in the color you want, and trim them down to achieve the look you're after.

https://rokblokz.com/products/ford-maverick-2022-mud-flaps

HRG

I'll second the RokBlokz if you can stomach the price. That's what I bought.

 

[Tbone289]

I agree with the above. I have the Rockblokz as well, and they are the cleanest-looking available, in my opinion.

You could save a lot of money by buying the materials and making them yourself if you can't justify the price. I've done that before with great results, but opted for the Rockblokz this time and don't regret it.

 

[Drew304]

I have the rock blockz also and highly recommend. I think they make the truck better looking for sure

 

[MoeMav]

Isn’t “dorky” in the eye of the beholder?

 

[mptlobo]

Love my Rokblokz

 

[mdl20813]

If you want something really slim, you could look at the micros from Ark Splashguards. Probably like $50 shipped for the set. Basically same material as Rokblokz. They also make a size comparable to Rokblokz. Just no color options except for the colors available for the logo.

 

[BeardedMarine]

If you want something really slim, you could look at the micros from Ark Splashguards. Probably like $50 shipped for the set. Basically same material as Rokblokz. They also make a size comparable to Rokblokz. Just no color options except for the colors available for the logo.

Thanks for that, just ordered the Micros. Mine is lowered and been looking for something like these.

 

[WJOHNM]

I had flaps on my 2 earlier mavs, but having second thoughts about my new Lobo.
Has anybody thought about ordering the small flap in front of the wheel from Ford, it's small, all I want to do is protect the lower part of the painted bumper and fenders, I think they can be modified to fit to look factory.

 

[havoc]

I used the flaps that are forward of the rear wheels to diy my own slim mud guards. I also ordered a second set for the front and added the mabett rear wheels well cavity cover.

 

[WJOHNM]

I used the flaps that are forward of the rear wheels to diy my own slim mud guards. I also ordered a second set for the front and added the mabett rear wheels well cavity cover.

Thats the look am looking for neat and clean nothing hanging down, just enough to cover painted parts, well done. how much were they from ford? are you using all rears for front too?
Looks great..

 

[havoc]

Thats the look am looking for neat and clean nothing hanging down, just enough to cover painted parts, well done. how much were they from ford? are you using all rears for front too?
Looks great..

They’ve been doing a good job of keeping the rocks from scratching the paint and keeping it clean.

That’s right I ordered another set of rear flaps. You have to cut the tabs off of all of them using flush cutters. From what I recall at least one holes line up with an existing screw or push clip. So you can just pivot the flap to choose how much you want to poke out. Then just drill the remaining holes to utilize the existing screws/push clips.

NZ6Z6011398C
NZ6Z6011398D

For the rear wheels after removing the flaps forward of the wheel they need to swap from drivers & passengers sides when going to behind the wheel. Then I put the rear splash shield covers on to block the cavity:
https://a.co/d/0az4JeMv
I also made a small black trapezoidal plate because that shield still leaves a small hole exposed. There’s an existing screw there that holds the plate I made on.

 

[WJOHNM]

So you removed the rear front of wheel flap and moved it to the rear of wheel? And only bought a set for front, did I get that right.

Sponsored