Forscan ACM module not appearing only “As Built”

[SB302]

Need some help. I’m trying to flatten the eq via forscan. The non “as built” module is not appearing. I tried everything that I can think of. Has anyone ran into this issue and have found a successful solution? 2025 Maverick XLT. I have the recommended cable from forscan. I have the latest version of forscan.

Sponsored

 

[Jim Beindit]

Sorry in advance not to hijack your thread but what version of forscan would I need for a 2024 xlt and what cable would I need. Thank you

 

[Carlitos_92]

Sorry in advance not to hijack your thread but what version of forscan would I need for a 2024 xlt and what cable would I need. Thank you

https://www.mavericktruckclub.com/forum/threads/forscan-101-step-by-step-how-to-start-guide.7406/

 

[SB302]

Bumping this one up guys. Any suggestions on original post

 

[rugedraw]

Bumping this one up guys. Any suggestions on original post

When you first connect FORScan and it asks if you want to select the existing profile, did you try selecting "no" so it does a fresh scan?

 

[SB302]

Yeah, I did. Still pulls the same modules. I’ll give it a shot again

 

[rugedraw]

Yeah, I did. Still pulls the same modules. I’ll give it a shot again

Try emailing FORScan support. It could be a database issue on their side with your VIN.

 

[BlueSpec1]

Thread: Manual ACM settings for ACM - Speakers and EQ

TheSSBoz
#4 https://www.mavericktruckclub.com/f...gs-for-acm-speakers-and-eq.61103/post-1213287

"As of today, and on the latest update of FORSCAN, still no ACM EZ mode options....

EDIT: for what its worth.... ACM codes were the same as the Bronco...(not the Hexadecimal however)
...
Following the same instruction as the bronco: Bronco ACM

727-01-01 affects speakers
727-01-02 affects EQ"

 

[SB302]

Thank you! I’ll give it a shot

 

[rugedraw]

Thank you! I’ll give it a shot

See above post from @BlueSpec1 as this seems to be a known issue on your vehicle where FORScan does not show easy mode for the ACM in particular. I still think it is a good idea to email them in case they are not aware of the isse, but for now, you may just need to make the changes manually.

 

[SB302]

Yeah, I emailed them just haven’t heard back yet. I’ll keep everyone posted once I hear back

 

[rusty_shackleford]

In case you still needed help, the correct change is 727-01-02 xxx0 xxxx xx.

Sponsored