Manual ACM settings for ACM - Speakers and EQ

[NCXLT]

Trying to install some amps and speakers. I’ve gotten the beta for a 2025 Hybrid to load but doesn’t appear to have the ACM option that shows the different sections, only the module numbers and field values.

Does anybody know for sure the module numbers to:
1 - Set EQ to flat
2 - configure the different speaker sets as Tweeter/woofer.

Right now the only option I have in forscan is ACM As Built

Sponsored

 

[rallyshark]

I know for sure the set Flat EQ is in easy mode, so you don't need to mess with module numbers. I think the others you mentioned are in the easy mode as well. At least that's the case on the '23 and '24 models. I guess they haven't updated it to show the ACM module configuration yet

 

[NCXLT]

I know for sure the set Flat EQ is in easy mode, so you don't need to mess with module numbers. I think the others you mentioned are in the easy mode as well. At least that's the case on the '23 and '24 models. I guess they haven't updated it to show the ACM module configuration yet

Doesn’t appear so. I don’t have that option in the 25 beta version and thus the ask. I have it for some of the modules but not the ACM.

 

[TheSSBoz]

Any updates on how to handle the above in the ACM of a 2025 Maverick?

And/or anyone have the proper as built codes?

As of today, and on the latest update of FORSCAN, still no ACM EZ mode options....


EDIT: for what its worth....

ACM codes were the same as the Bronco...(not the Hexadecimal however)

My "as built" values in ACM were:
727-01-01 382B 14F1 0099
727-01-02 0901 000D 003B

Following the same instruction as the bronco: Bronco ACM

727-01-01 affects speakers
727-01-02 affects EQ

 

[rusty_shackleford]

Any updates on how to handle the above in the ACM of a 2025 Maverick?

And/or anyone have the proper as built codes?

As of today, and on the latest update of FORSCAN, still no ACM EZ mode options....


EDIT: for what its worth....

ACM codes were the same as the Bronco...(not the Hexadecimal however)

My "as built" values in ACM were:
727-01-01 382B 14F1 0099
727-01-02 0901 000D 003B

Following the same instruction as the bronco: Bronco ACM

727-01-01 affects speakers
727-01-02 affects EQ

It works the same as the bronco, I got it flattened on mine. But, unless you’re going to go full active, it makes the speaker chimes and mid frequencies unpleasant. I’m still messing with things, might just need a nicer crossover for the component speakers I bought or an L pad for the tweeters.

727-01-02
0901 000D 00
Change to
0900-000D-00

 

[Carlitos_92]

But, unless you’re going to go full active, it makes the speaker chimes and mid frequencies unpleasant.

Disable the chimes. That has been my favorite set of Forscan mods overall.

 

[rusty_shackleford]

Disable the chimes. That has been my favorite set of Forscan mods overall.

I would but I like them lol. Not the sound but my son and gf are quick to buckle when they go off, that’s precious cargo

Sponsored