Flexbed width for 2x6

[dc73pdsgt]

anyone know what the width of the bed is for the 2x6 pockets? trying to create a poor mans divider set. thanks.

Sponsored

 

[TheWizziard]

Approximately 54.25" I recommend you cut to fit.
There will be variation from vehicle to vehicle. Also depending on what kind of liner you have and how tight you want them to fit

This is for the back divider pockets.

 

[dc73pdsgt]

Thx

 

[bighap]

 

[dc73pdsgt]

Perfect thanks!

 

[Kingfish]

anyone know what the width of the bed is for the 2x6 pockets? trying to create a poor mans divider set. thanks.

If I can add, some felt material duck taped to the ends of your divider will help it slide smoothly into place and reduce scratching. In case you haven't done something like that yet

 

[dc73pdsgt]

Was actually gonna get some liquid rubber for the ends but yours is a good ideas too

 

[Montana]

I got this:

https://www.amazon.com/gp/product/B0000AZ9KS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Food for thought.

 

[Markii56]

54 1/4 worked perfect for me, even with the spray-in bedliner. I went with 2, 2X6s; while a 2X8 or a 2X10 fits in the slot, I was afraid the rail for my tonneau would interfere with anything taller, as you do have to twist or angle the wood a bit to get it into the slot. I put in one most of the time, add the second one right on top of the first if I have taller loads. Works great, and 2, 2X6s are a lot easier to handle than anything larger.

 

[dc73pdsgt]

 

[Johnkn]

If I can add, some felt material duck taped to the ends

Is that made with real ducks?



.

 

[Sliphorn]

Is that made with real ducks?



.

..
Guts, duck guts.
..

 

[Johnkn]

..
Guts, duck guts.
..

LOL, as opposed to "Duct Tape" ?

 

[dc73pdsgt]

It’s so gross when you have to grind them up to make the tape… and the quacking…

 

[Kingfish]

Is that made with real ducks?



.

I know. I saw that after posting. Sad part is I don't think it was auto correct. I think I actually typed ducks.

Sponsored