- Thread starter
- #1
Decided a couple weeks ago I wanted to make a bed divider for my Maverick. I decided to make it with customizable sections. I screwed two pieces of 2x6 to the cross bed 2x6 then notched the vertical pieces every 6 inches from the center. I then attached other 2x6 pieces to same length 2x4s to make the dividers. I made 3 dividers, one that’s bed length, and two others that fit the length of either side of cross bed 2x6. I’m not an experienced wood worker so I need to work on the notches to have the dividers go in smoothly but that’s easy enough. Photos included to help my description.
Sponsored