Detailing question.

[LOBOtime]

What is the best way you guys have found to remove debris from the space between the cab and the tonneau cover? Aside from removing the cover all together.

Sponsored

 

[Glen Baker LLC]

Shop-Vac first to get the large real loose stuff out then change and use a crevice tool I then change the hose and put it to the exit air side of the back and try and blow out whatever I can and use a long bristled paint brush.
I also have the option of using an air compressor.
Ah the disadvantage of a unibody "truck".

 

[nandesho]

I use one of the sticks I find in this area to dislodge other debris while blasting it with a handheld leaf blower.

I'm considering putting some low density foam in this crevice, but I fear that could become a mold/insect magnet.

 

[dalola]

Air compressor & blow gun.

 

[Grabbs]

I put weather strip in between. No crap falling in now.

 

[ripperAZ]

What is the best way you guys have found to remove debris from the space between the cab and the tonneau cover? Aside from removing the cover all together.

crevice tools, air gun tweezers, skewers from your grill anything that can get the large chunks out blow from the cab back and most of it come shooting out if you have a good air gun I actually use my lawn blower the first time

 

[DWV]

I use one of the sticks I find in this area to dislodge other debris while blasting it with a handheld leaf blower.

I'm considering putting some low density foam in this crevice, but I fear that could become a mold/insect magnet.

Just be sure to use closed cell foam, not open cell-which acts like a sponge.

 

[Rigel7]

What is the best way you guys have found to remove debris from the space between the cab and the tonneau cover? Aside from removing the cover all together.

I jammed some foam weather stripping in the gap, works pretty good.

 

[MaverickMark]

What is the best way you guys have found to remove debris from the space between the cab and the tonneau cover? Aside from removing the cover all together.

Mine has no gap. I don't have that problem. I have the hard roll up from the Ford store.

 

[LOBOtime]

Mine has no gap. I don't have that problem. I have the hard roll up from the Ford store.

That looks really nice.

 

[Cancunbadlands]

Shop vac

 

[Meeka]

I put weather strip in between. No crap falling in now.

Could you post a picture if you can pls. Thanks.

 

[Ben2023L]

What is the best way you guys have found to remove debris from the space between the cab and the tonneau cover? Aside from removing the cover all together.

I put a piece of weather stripping/ modeling there - seems to work well. You can’t even notice it’s there, blends right in

 

[dochawk]

80v blower:

they really are the same power as a 50cc gas (I didn't believe the claimbefore I started buying them, but yes, they are).

Or, I have an air gun for my compressor, which is basically a trigger on a quarter inch copper tube. I have it to restart cooling coals in my smoker.

Sponsored