Availability of Ford Bed Divider?

[Ryom]

With a tri-fold hard tonneau cover, the Ford bed divider makes for a very nice pseudo-trunk.

Sponsored

 

[Redline]

I really like mine. It was a b*tch to install. It didn't feel like it was going to fit, but I eventually coaxed it in place and now it comes on and off rather easily. I recommend using the tether in case the latches open so it doesn't go flying out of the back of your truck. It's unlikely, but possible.

 

[svogt302]

Mine was definitely a bitch to install too
Lastine I took it out I left it out.

 

[chrisofpa]

Thanks everyone, I am hoping to have a moment to contact one of the dealers this week and see if I can get one of these dividers. I have to double check to see if the clamps on my Diamondback cover now clear that rail, I think it does.

 

[chrisofpa]

So I ended up calling around all places recommended here and none of them would allow me to purchase the divider kit with Ford Points unless I bought it in person, since all the locations were halfway across the country that wasn't practical. I called Ford Motor Company to ask them the availability on the divider kit on their website, they had no eta and no news on it, they told me to put in my E-Mail address and wait for an update.

I decided to call dealerships in my area of Pennsylvania to see if they had one in stock, first place I called was actually the dealership that tried to rob me when purchasing my Maverick (I didn't realize that until someone picked up) and they had it but wanted $530 for it, so not only do they rob you on vehicle purchases but parts too.

Second dealership in my area had it for $325, I booked an appointment to have them throw it on, they're just waiting to schedule a day since they don't have the part at that location. I decided to pay and let them install it since I heard it can be a bear to install, plus I am still in the process of installing other accessories, including perfecting the seal on my Diamondback cover, so between that and my job my time is kinda booked. I also purchased the orange lettering to fill in the Maverick lettering on my tailgate and door frame inserts (The paste on ones with the Tremor Logo), I may have them install that too if they don't charge too much.

Here's hoping this divider clears the bolts securing my tonneau cover, I pulled the cleats on the rail past those points and it doesn't snag, so I am hopeful.

 

[TMD78]

I ordered one on Saturday, and it arrived today (two business days basically) to my local dealer so maybe stock is back to normal (also in PA). I assume some of these may have been built to different tolerances, because I did not experience any of the difficulty I’m reading about the install. It literally took me longer to open the box, back into some shade, and find the right torx bit than the install. Loosen the two top torx screws on each side and it *COULD* be a breeze for you like it was for me.

 

[chrisofpa]

I ordered one on Saturday, and it arrived today (two business days basically) to my local dealer so maybe stock is back to normal (also in PA). I assume some of these may have been built to different tolerances, because I did not experience any of the difficulty I’m reading about the install. It literally took me longer to open the box, back into some shade, and find the right torx bit than the install. Loosen the two top torx screws on each side and it *COULD* be a breeze for you like it was for me.

Yeah I think I am going to order it and install it myself, the dealer that said they had it never called me back. I left a message a couple days ago and no return call. Now that its back in stock on the Ford Accessory Website, I will just ship it right to my home.

 

[Cancunbadlands]

I use the $25 ratcheting Harbor Freight cargo bar, very flexible for placement

 

[chrisofpa]

I use the $25 ratcheting Harbor Freight cargo bar, very flexible for placement

A cool solution but I wanted something that was a bit more solid so I can place smaller items in my bed without them flying past the bar.

 

[Red Eyes - Wide Shut]

I just bought one at my dealer this weekend. I called the Parts Department and they had it for me the next day. I really like it although it is a bit difficult to install.

A 2 x 8 works great and at a substantial less price. Just a thought.

 

[wax87]

I have been watching the availability of the Ford Bed Divider (https://www.ford.com/product/cargo-management-system-bed-divider-kit-p2914217750) for a month and it never seems to go back into stock. Anyone know what's going on? I see Levitt Town Ford Parts have them in stock (https://parts.levittownfordparts.co...4v8z6krhO1ly4TpO_0WzLSswkpiMgPV2JAAKse-UM2X1h). I may contact them but I have enough Ford Points to get it for free and I am unsure if I can use those points if I get it through Levitt Town Ford.

Thoughts?

I made mine out of two blocks of wood and two 3/4 PVC pipes

 

[chrisofpa]

I just placed my order with the Ford Accessory website, after using my Ford Points the divider ended up costing me $16.

I made mine out of two blocks of wood and two 3/4 PVC pipes

Quite inventive, are you happy with how it turned out?

 

[wax87]

I just placed my order with the Ford Accessory website, after using my Ford Points the divider ended up costing me $16.



Quite inventive, are you happy with how it turned out?

LOL it is nothing impressive, it is simple, light and useful but it ain't pretty, I guess I could paint the PVC pipes to make it look better.

 

[chrisofpa]

LOL it is nothing impressive, it is simple, light and useful but it ain't pretty, I guess I could paint the PVC pipes to make it look better.

Hey if it works, that's what is important. I did manage to get my Ford bed divider installed this weekend, only cost me $16 down from $340 with my Ford Points. It's nice.

Sponsored