Sponsored

Anyone install a tailgate light bar below the tailgate?

Hcopter

2.5L Hybrid
Well-known member
First Name
Mike
Joined
Sep 16, 2022
Threads
6
Messages
191
Reaction score
349
Location
KS
Vehicle(s)
1996 Ranger, 2023 Maverick Lariat, Hybrid
Engine
2.5L Hybrid
Mine only acts as a brake light, no turn signals or backup, but it was only $14 plus $10 for the brake logic circuit to keep it from flashing with the turn signals. I tapped into the brake/turn wire on each taillight, haven't had any issues (I don't think, I'm not back there looking at it too often).

Sponsored

 
OP
OP
dc73pdsgt

dc73pdsgt

2.5L Hybrid
Well-known member
First Name
Mark
Joined
Jul 29, 2023
Threads
35
Messages
335
Reaction score
251
Location
Tucson, AZ
Vehicle(s)
2023 Ford Maverick Lariat Hybrid
Engine
2.5L Hybrid
Clubs
 
None of the trailer wiring is used. The T-connector plugs into the taillight harness (no splicing).
Really? That’s intriguing, do you have a link or more info? Thanks in advance,
 

Dmat

2.5L Hybrid
Well-known member
Joined
Oct 26, 2022
Threads
46
Messages
571
Reaction score
617
Location
Baton Rouge
Vehicle(s)
MAVERICK
Engine
2.5L Hybrid
Clubs
 
Was looking for the coloring of the tail light wires and found this thread. What im at a loss for though is my colors dont match the colors listed in the diagrams. well not all of them. I'm naming them as wire-strip.

Like it looks like I have violet-white and gray-yellow on one row. the next row. has Green-White, Violet-Dark Purple, and Green-Brown.

I've been able to test that the second row is turn/brake, running, reverse but ive got no clue what the top ones should be aside from a ground.

Any ideas.

edit: I have a lariat so this is a 6 pin connector. are the XL and XLT also the 6 pin?
 

Hcopter

2.5L Hybrid
Well-known member
First Name
Mike
Joined
Sep 16, 2022
Threads
6
Messages
191
Reaction score
349
Location
KS
Vehicle(s)
1996 Ranger, 2023 Maverick Lariat, Hybrid
Engine
2.5L Hybrid
The Lariat also has an LED accent around the outer edge, that may be the extra wire(s) you're seeing.
 

BlueSpec1

2.5L Hybrid
Well-known member
First Name
Gene
Joined
Jul 10, 2022
Threads
3
Messages
779
Reaction score
796
Location
Texas
Vehicle(s)
23 XLT 2.5L, 22 Escape Plug In, 23 Bolt EUV
Engine
2.5L Hybrid
Was looking for the coloring of the tail light wires and found this thread. What im at a loss for though is my colors dont match the colors listed in the diagrams. well not all of them. I'm naming them as wire-strip.

Like it looks like I have violet-white and gray-yellow on one row. the next row. has Green-White, Violet-Dark Purple, and Green-Brown.

I've been able to test that the second row is turn/brake, running, reverse but ive got no clue what the top ones should be aside from a ground.

Any ideas.

edit: I have a lariat so this is a 6 pin connector. are the XL and XLT also the 6 pin?
Colors are different, function should be the same.
https://www.mavericktruckclub.com/forum/threads/rear-led-light-bar-recommendations.16808/post-390640

https://www.mavericktruckclub.com/f...the-wiring-diagram-for-the-tail-lights.31676/
Sponsored

 
 







Top