Anybody get ForScan working with 2024 Mavericks?

[shrek]

The current version on their website, 2.3.58 released Jan 2, seems to work just fine with my 24 Maverick lariat awd fx4 4k tow, no test build or strategy number needed.

Though the release notes do not mention my2024 mavericks, and that other page still has the scary “MY2024 will not be supported” message, it seems that the new version added support. Was able to enable eco and sport so far.

Mine has yet to be built. But where you able to get rid of the dreaded "honk honk" after exiting the vehicle with it running and the key not inside?

Sponsored

 

[BradMav]

Mine has yet to be built. But where you able to get rid of the dreaded "honk honk" after exiting the vehicle with it running and the key not inside?

That’s one of my next missions, but I assume so, I’ll update once I try.

 

[deputylynch]

Now that it appears forscan will work on a 24 does it look like, when exploring through it, if programming the keyless pad on the door will be an option?

 

[shrek]

Now that it appears forscan will work on a 24 does it look like, when exploring through it, if programming the keyless pad on the door will be an option?

I would also like to know this. As I was NOT paying 200.00 for it when it can be had for 1/2 that. If not Ill have to get with a friend that can go in after hours and use the FORD system. Stupidly Priced stick on option. THink I will stick it on the bed side rail (Inside the bed) THe location on a door is stupid.

 

[BradMav]

Double honk successfully disabled in Easy Mode using ForScan.

Also, following other topics, enabled Traffic Sign Recognition (TSR) which showed the round euro style speed indicators along with no passing zones/etc, but then to get the US style speed signs I basically had to disable TSR and enable just speed sign recognition (called SLIF - Speed Limit Information Function.)

All of this I found in EASY mode without having to enter the hexadecimal characters.

 

[deputylynch]

Double honk successfully disabled in Easy Mode using ForScan.

Also, following other topics, enabled Traffic Sign Recognition (TSR) which showed the round euro style speed indicators along with no passing zones/etc, but then to get the US style speed signs I basically had to disable TSR and enable just speed sign recognition (called SLIF - Speed Limit Information Function.)

All of this I found in EASY mode without having to enter the hexadecimal characters.

Wow in forscan, do you see anything that you might be able to do the keypad pairing as in the attached instructions?

 

[BradMav]

Wow in forscan, do you see anything that you might be able to do the keypad pairing as in the attached instructions?

Sorry I don’t see any attachments, and I’m not so interested in keypad mods so probably won’t be digging into that one personally.

 

[deputylynch]

Sorry I don’t see any attachments, and I’m not so interested in keypad mods so probably won’t be digging into that one personally.

It wouldn't allow me to do the attachment and I'm not asking you to change anything just wanted to know if you can see it with forscan before I invest in it.

 

[BradMav]

It wouldn't allow me to do the attachment and I'm not asking you to change anything just wanted to know if you can see it with forscan before I invest in it.

I understand, but It’s cold as hell out here LOL and I have to wait til my son goes to bed for free time which is in short supply for me these days, hope you understand not trying to be rude/unhelpful . Next time I go out to tinker with my truck I’ll try to remember to check that and let you know, but not sure when that’ll be, in the meantime hopefully somebody else can help answer your Q

 

[dearbulls]

So, does it work on the 2024 now? Looking to add drive modes, road sign recognition, and deactivate start/stop. Thanks

 

[FischAutoTechGarten]

This is good news.... I have the DD Elite fog lights and the F150 light switch w/ fog option... So, I'll need to enable that in Forscan.

 

[Deweyordeweynot]

I've just went back to the FORScan forum site, and the lack of 2024 support has still not been addressed by the FORScan team. However, the latest post on 12/9/2023 from a forum member 'tractmec' (who has been active there for a while) tries to parse out the language about 2024s not being supported. Granted, there is nothing that is particularly encouraging, but it leaves you with the impression that we may eventually see 2024 support - it just may be a while. The is a good bit of sensible commentary in the post and I'd encourage folks to pop over there and read it interested.

Ford 2024+MY models will not be supported - FORScan forum

I'm SO glad I looked into this before pulling the trigger on hardware and a license that doesn't work on my vehicle (yet)! I was looking forward to doing a few tweaks but I'm gonna wait until y'all tell me it's possible on my 2024 XLT. Thanks!

 

[Deweyordeweynot]

Hey Automate,
Long time no talk. Yes. I traded in my 2022 Ford Maverick Lariat for a 2024 Ford Maverick Lariat.
Yes. I emailed Forscan with my VIN number and they sent me a test build. I will copy and paste the email here below. I enabled TSR and everything is working fine.


Hello,

We have added this car to FORScan database, please try again using this test build:

https://forscan.org/download/FORScanSetup2.3.58.test20231211.exe

Link doesn't work...maybe it's been removed?

 

[fauxhican]

... I'm gonna wait until y'all tell me it's possible on my 2024 XLT. Thanks!

It's possible. Website hasn't been updated, but several posts between the one you quoted and this one with examples of success, including my 2024 XLT. Don't need the test build link you referenced in a second reply, just the standard 2.3.58 version, which is their latest.

 

[MAVERICK OCD]

Link doesn't work...maybe it's been removed?

It should be included in the latest version of the software by now. I would give it a try. You should be GTG.

Sponsored