Search results

I was in a similar situation and went with the EB AWD for now. You'll be adding about 10mpg so in a few years you may save the amount of money on gas and Ranger repairs that you'd lose in value in the vehicle in that same time. It may be worth it

hydroflask 24oz snaps on the front door perfectly. I've had it in my truck for weeks and it hasn't come out.

Any update with installed pics? The amazon listing makes it look like a darker brown than the seats. I'd be interested to see how close they come to matching.

I didn’t have an issue measuring the exact space, the issue is fitting a rigid piece of lumber that’s 10.5” tall in those slots with the tonneau cover rails in the way. I was able to do it with a single 2x4 but I wanted my divider to be taller. I didn’t want it to be a friction fit so I added...

I wanted to build a bed divider out of 2x4’s but also wanted to have it be modular with a removable piece to use across the wheel well flexbed slot as a support for when I haul 4’x8’ material. I came up with this design using lag bolts as post’s with holes drilled into the top piece of lumber to...

Search BAK x4 on Youtube. Ford uses this with their logo for the "factory" cover. The sun melting the glue is a common problem. The x4s is a much better cover without the felt.

Yes it does. The increased approach angle and lockable rear differential make it more capable than the current 2022 FX4 model. Being able to lock it in AWD is also a feature that some may be willing to pay for. Now is that meaningful for me? No it isn't. I drive strictly on paved roads. The...

I agree. I like the Tremor and it looks like it would be a lot of fun but my truck hasn't left pavement yet and it is a very rare circumstance where it will have to. I've been getting 28mpg on my Lariat AWD and have got some great use out of the bed which is exactly what drew me towards the...

This is the first hands on videos about the Tremor package that I have seen online.

I'm not sure what rubber feet you are talking about. The locking connection on both the side rails and each slat along the rolling cover are all metal and I don't think they'll get worn out from daily use.

I believe if you select sources and pick pandora then you'll get that top screen. I don't use it personally but my wife does on her Escape. That might be why on the screen you like it show's pandora next to source and the bottom picture shows your bluetooth connection.

My 2013 chevy cruze had a physical toggle switch that left cruise control in the on position all the time. It would obviously reset when the car was turned off and you could always set it lower than the previous cruise speed by using the set button instead of resume. It doesn't make sense to me...

I can't say I've experienced that. Maybe your cover isn't pushed as far back up against the window as it should be? My tailgate has a snug fit with the seal on the back of the cover but I haven't had it hit the back of the cover.

I posted this on another thread but I used J-B Weld Plastic Bonder in black to permanently attach the plastic caps on the end. I think it's a much better option than just using some super glue.

Check your glove box and behind your rear seat. They might have gotten thrown in with the wire pigtails for your bed access points.

That's not normal. Your dealer must have them somewhere and not installed them when completing the PDI process.

The corner plastic covers pop off way too easily on the BAK x4s. I found this JB Weld Plastic Bonder that seems to be the best long term solution for making these covers stay in place. I mixed up a batch and covered the underside of the trim piece before inserting the clip back into the cover...

Is that Avalanche Grey? It looks amazing on the Maverick. Way cleaner than Cactus imo. As much as I love my Carb Grey, I think if that was available for 2022 I might have ordered that color.

Installed the Bak Revolver x4s I got from @Realtruck from their sale from their forum post a few weeks ago. Love how solid this cover feels!

It is true. X4S no longer has felt stuck with adhesive that will melt in high temps.