ULTIMATE FORSCAN Ford Maverick Spreadsheet (MASTERLIST) 🗒️

[EONR24]

I did turn on all trips displays but nothing appeared, well to be fair, redoing the fog light programming turned them all back on. Then I tried to do the average speed display but it didnt show up under the trips for average speed.

for the seatbelt change just copy the coding as shown in the spreadsheet and it should work

Sponsored

 

[EONR24]

These two sections of coding in the HVAC seem to have to do with engine type.

Mine is a hybrid and I have a CC from a gas, at the time I purchased I never realized they were different.
Is this the code changes? Txs
[/QUOTE]
if its working fine than I would leave it as is. but I really don't know if changing that coding will change the way the HVAC works or if the HVAC unit itself can be reflashed. I don't know honestly.

 

[EONR24]

I did turn on all trips displays but nothing appeared, well to be fair, redoing the fog light programming turned them all back on. Then I tried to do the average speed display but it didnt show up under the trips for average speed.

You have the 4 inch cluster or the 6.5 inch?

 

[Dmat]

You have the 4 inch cluster or the 6.5 inch?

whatever the lariat has. I'm honestly not sure off hand what size it is.

 

[EONR24]

whatever the lariat has. I'm honestly not sure off hand what size it is.

yeah you have the bigger cluster, I have the 4 inch cluster. maybe its different idk but, average speed display should work. you could try disabling and reenabling it.

 

[Dmat]

yeah you have the bigger cluster, I have the 4 inch cluster. maybe its different idk but, average speed display should work. you could try disabling and reenabling it.

I'll try it later today when I mess with the seatbelt settings.

 

[EONR24]

whatever the lariat has. I'm honestly not sure off hand what size it is.

instead of easy mode. try doing it this way. I bet its different for the 4 inch and 6.5 inch cluster

IPC ASbuilt

720-01-01
xxxx-x4xx-xxxx

 

[Uriis5]

Do you know if there's a way to disable the seatbelt menu and chimes, but leave the dash light to work for all seats? I made a modification, but it only works for the driver seat. I'd like it to show if a passenger doesn't have their belt on.

 

[EONR24]

Do you know if there's a way to disable the seatbelt menu and chimes, but leave the dash light to work for all seats? I made a modification, but it only works for the driver seat. I'd like it to show if a passenger doesn't have their belt on.

There are two seperate things addressed by changing the seatbelt coding. The "Minder" and the "Monitor". The seatbelt screen in the cluster that shows the check marks is the "Monitor". The red seatbelt light is the "Minder". The "Minder" has a Chime it activates. So for your situation, I would perform the coding changes pictured below and see if this works for you.

 

[RadioDoc]

Does anyone know what system is node 7C7? I'm seeing this in my AB file, but the part number isn't crossing over to anything in my module configuration report.

 

[EONR24]

Does anyone know what system is node 7C7? I'm seeing this in my AB file, but the part number isn't crossing over to anything in my module configuration report.

I would assume the PCM but looking at several of the Maverick's AS builts, I see they only go to 7C6

 

[RadioDoc]

I would assume the PCM but looking at several of the Maverick's AS builts, I see they only go to 7C6

Here's the list of nodes to systems I've compiled so far through a combination of cross referencing the module configuration list from my truck and the spreadsheets. It's a combination of Maverick and F150 codes.

My AB has data for addresses in these nodes:
6F0, 706, 716, 720, 723, 724, 726, 727, 730, 733, 737, 754, 760, 791, 7E4, 7E6

But then I've got node module data for these nodes in my AB file:
6F0, 706, 716, 720, 723, 724, 726, 727, 730, 732, 733, 737, 746, 750, 754, 760, 765, 791, 7C7, 7E0, 7E4, 7E6

I'm still working on figuring out the field tags for the module information in the AB file (so far the only one I've got like 90% confidence in is <F113> is the part number), and that's where I'm seeing 7C7 with a part number attached to it.

NodeID	System	Sys_Plaintext
6F0	BCM_C	Body Control Module C
703	AWDM	All-Wheel Drive Module
706	IPMA	Image Processing Module A
716	GWM	Gateway Module A
720	IPC	Instrument Panel Control
723	BECMB	Battery Energy Control Module B
724	SCCM	Steering Column Control Module
726	BCM	Body Control Module
727	ACM	Audio Control Module
730	PSCM	Power Steering Control Module - Electronic
732	GSM	Gear Shift Module
733	HVAC	Heating Ventilation Air Conditioning
736	PAM	Parking Assist Control Module
737	RCM	Restraint Control Module
740	DDM	Driver Door Module
741	PDM	Passenger Front Door Module
746	DCDC	DC to DC Converter Control Module
750	PACM	Pedestrian Alert Control Module
754	TCU	Telematic Control Unit
757	TBM	Trailer Brake Module
760	ABS	Anti-Lock Brake System
761	TCCM	Transfer Case Control Module
765	OCS	Occupant Classification System Module
775	RGTM	Rear Gate/Trunk Module
791	TRM	Trailer Module
797	SASM	Steering Angle Sensor Module
7A7	FCIM	(FCIM Long Name)
7C4	SODL	Side Obstacle Detection-L
7C6	SODR	Side Obstacle Detection-R
7C7
7D0	APIM	Accessory Protocol Interface Module
7E0	PCM	Powertrain Control Module
7E3	AHCM	Auxiliary Heater Control Module
7E4	BECM	Battery Energy Control Module
7E6	SOBDMC	Secondary OBD Control Module C

 

[AVC]

Anyone ever try to talk to the radio module, and whether there is any RF/IF gain settings one can play with?

Or better, replaced a Sync2 with a Sync 3 to get the better reception and HD radio on XLT's?

 

[EONR24]

 

[EONR24]

Anyone ever try to talk to the radio module, and whether there is any RF/IF gain settings one can play with?

Or better, replaced a Sync2 with a Sync 3 to get the better reception and HD radio on XLT's?

Maybe this video below will help. Also, I believe lariats come with SYNC 3 and it is swappable into a XL or XLT.

Sponsored