Once again people Asking warranty questions here rather than going to their dealers where they're supposed to take their truckMy Meverick ecoboost 2.0 has no voltages or current from truck bed auxiliary power access points, Any thoughts?
Sponsored
Once again people Asking warranty questions here rather than going to their dealers where they're supposed to take their truckMy Meverick ecoboost 2.0 has no voltages or current from truck bed auxiliary power access points, Any thoughts?
Buy a 2000w inverter and hook it up too your batteryOk fond out about the reason why i can't use my saw with the plug in the bed of the truck, it is 900 watts and the plug only can be used with 400 watts so good luck finding a use for it. I am pissed about it.
Did you find a solution to your problem? I am having the same problem.I appreciate it, will call a dealer on monday.
Thank you for this. Didn’t have power back there and it was fuse 88 that’s blown.Did you find a solution to your problem? I am having the same problem.
Edit: Found the solution. Fuse is #88 (20A). It is not labeled on the manual. There are also fuses on #87 (40 A) and #90 (60 A).
well it is really the amperage; 110 V at 300 watts = 3.3 amps, you say 400 Watts, I guess it is different for the bed and the cab inverters?Ok fond out about the reason why i can't use my saw with the plug in the bed of the truck, it is 900 watts and the plug only can be used with 400 watts so good luck finding a use for it. I am pissed about it.
I have a 24 Lariat Hybrid with push button start and discovered that the Start button needs to be pushed a second time for the 110 outlets to be live. The engine DOES NOT have to be runningMy Meverick ecoboost 2.0 has no voltages or current from truck bed auxiliary power access points, Any thoughts?
The Maverock doc indicates the outlet in the truck bed is 400W so you shouldn't be upset. Whoops, I was responding to a very old post.....sorry.Ok fond out about the reason why i can't use my saw with the plug in the bed of the truck, it is 900 watts and the plug only can be used with 400 watts so good luck finding a use for it. I am pissed about it.