How many Add-ons are you up to?

[PaidEMS]

I went for the TRlumens for a 2015+ F150. I love the look and it hyper flashes for a second at first when you brake. I got it off Amazon.
The install was a little tricky - getting to the factory plug to unplug it. Had to pull the head liner and then actually pulled to hard and had wires pull out. Had to splice in new connectors. It all worked out.

Thanks for the info.

Sponsored

 

[Harleystreetbob]

Modifications so far:
Lasfit switchback turn signals
Lasfit Rear cabin lights
Lasfit Rear back up lights
Lasfit Side Marker lights
Maverick Carbon Fiber lettering
Truxedo ProX15 soft roll up cover
Ceramic Tint
Hood Wrap
Roof Wrap
All weather Matts - ordered with ford points from truck pruchased

​

how much for hood wrap?

 

[RobA979]

Hey! For fog light switch mounting Spot. I ordered one and it’s nice. I just don’t know where to drill the hole for the wire pass through.

www.etsy.com/listing/1218357449

Got mine all hooked up. Hole drilled in the lower right back corner. Access is OK if you pull the glove box.

 

[Gr3y]

how much for hood wrap?

I paid $500
It's pricey but the wrap material itself is warrantied for 10 years plus workmanship here at shop locally in San Diego.

-Sal

 

[BILLNOROVILLE]

added floor mats from vehicle that went to Carvana
added front mud flaps I had and bought generic Ford labeled rear mud flaps
added scuff guard tape at bottom entry painted metal at front and rear door sills
added rubber door protectors at edge of door
added folding tonneau
added bed mat
added dash mat
added fits trash can
added pin striping
added Hybrid emblems on each side of front fenders
added sunshades I had in my car that went to Carvana
added screen protector glass
added tool kit and tire patch kit behind rear seat
added cut 2by6 to go across back slots in bed
added chrome Ford "Ranchero" Script from my 73 Ranchero to the front grill
count =15

 

[Barracuda340]

I am up to 9....(It was 10, got the TNVTEC wireless Carplay and returned it, kept having to unplug and replug).
OEM Floor mats, OEM Seat Covers, OEM Mud Flaps, Center Console Tray 3D printed, Dash Cubby storage bin 3D printed, Trident FastFold Tonneau cover, Raised Tailgate lettering, custom storage bag behind rear seat.

I like that behind the rear seat storage bag. Where did you get that at?

 

[dadd75]

I really like the bed extender, but might try a 2X12 across the bed to hold groceries and stuff near the end of the bed without falling all over the place. Cost is a factor. Anyone tried something like this yet? And if so, how is it working.
(I don't really have use of extending the bed, but like the multi-purpose use of holding things near the back of the bed).

 

[Barracuda340]

I really like the bed extender, but might try a 2X12 across the bed to hold groceries and stuff near the end of the bed without falling all over the place. Cost is a factor. Anyone tried something like this yet? And if so, how is it working.
(I don't really have use of extending the bed, but like the multi-purpose use of holding things near the back of the bed).

I'm gonna carpet a 2x8 and stick it back there, but I also picked this up off amazon for groceries and such. It's made specifically for the width of the maverick and its attach points in the back. I think it was $20-$25

 

[dadd75]

I'm gonna carpet a 2x8 and stick it back there, but I also picked this up off amazon for groceries and such. It's made specifically for the width of the maverick and its attach points in the back. I think it was $20-$25

I bought something similar for my F150, but it is a tension bar with the net. Hope it works fine with the Maverick? Hoping to have my Mav this week??????

 

[Barracuda340]

Picked up another mod to add on lol. Gonna mount it to the plastic dummy panel on the LH side of the bed. A lot of people swap that out for a second bed cubby. One cubby back there is enough storage for me. I only plan on putting 4 ratchet straps in there anyways.

 

[LSchicago]

4, and I don't even have the truck yet.

 

[Barracuda340]

Close to 50 add ons and mods and counting. Slowing down a bit though.

 

[Don806]

may not be able to remember them all......nothing super expensive
learned the how to's of most of these from THIS FORUM! (thanks)
mud flaps
hood deflector
hard tonneau (soft roll up till last week)
plasti-dipped the orange trays to make them grey
bed rug
tailgate assist
new tie down hooks on the tailgate
back seat trash can using a FITS plug
drivers side bed cubby
LED bed lights to replace the one lost from the cubby install, using the OEM light switch
moved the bed inverter into the drivers side bed cubby
around the hitch plastic piece install
hitch cover
under-seat storage dividers
useless cubby by the radio modification (coin holder)
added removable cup holder to drivers door handle
tray above the radio
2piece center console organizer (on the way) replacing home made wooden one
radio cover piece (on the way)
picked up steelies with tires for winter use
deactivated seat belt chime
tailgate gap cover (forgot this one)

 

[K5Blazer]

Ford Tailgate Spoiler
Ford Rubber Bed Mat
Ford All Weather Mats
Laminate-X: Tail, side marker tint
Front window tint
LasFit LED: Switchback front turn signals, Tail and Backup, Cargo lights
Tufskinz: Grill accent overlay, Fender badge line inserts, Door handle overlays
Ford Emblem decal overlays, White
Ford Emblem Covers, Black
License Plate Frames, black steel
Tailgate Seal Kit
Dash cam
Tailgate letters

A couple more things inbound.

 

[Mikew555]

I seriously can't count them all. I'm like a kid buying things. Its fun, I've had so many vehicles in my life and never had this much fun with one

Sponsored